MISP

INSTALLATION INSTRUCTIONS for RHEL 7.x and CentOS 7.x

-2/ RHEL7/CentOS7 - status

!!! notice Tested fully working without SELinux by @SteveClement on 20210401 TODO: Fix SELinux permissions, pull-requests welcome.

!!! notice This document also serves as a source for the INSTALL-misp.sh script. Which explains why you will see the use of shell functions in various steps. You will see bash-functions in various steps. You can either copy between the {}’s or copy the entire function and just run it. Henceforth the document will also follow a more logical flow. In the sense that all the dependencies are installed first then config files are generated, etc…

-1/ Installer and Manual install instructions

To install MISP all you need to do is the following on a clean supported distribution.

!!! notice

```bash
# Please check the installer options first to make the best choice for your install
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh

# This will install MISP Core
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh -c
```

!!! notice If the next line is [!generic/community.md!]() click here.

!!! notice Maintained and tested by the community.
Parts of the installation procedures can also be found in the automatic VM generator script bootstrap.sh of misp-packer.

0/ Overview and Assumptions

!!! notice There are technically only minor differences between CentOS and RHEL.
For more information on what might differ, this StackExchange question might answer some questions.

!!! warning The core MISP team cannot easily verify if this guide is working or not. Please help us in keeping it up to date and accurate. Thus we also have difficulties in supporting RHEL issues but will do a best effort on a similar yet slightly different setup.

!!! notice Maintenance for CentOS 7 will end on: June 30th, 2024 Source[0] Source[1] CentOS 7-1908 NetInstallURL

-1/ Installer and Manual install instructions

To install MISP all you need to do is the following on a clean supported distribution.

!!! notice

```bash
# Please check the installer options first to make the best choice for your install
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh

# This will install MISP Core
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh -c
```

This document details the steps to install MISP on Red Hat Enterprise Linux 7.x (RHEL 7.x) and CentOS 7.x. This is a joint RHEL/CentOS install guide. The authors tried to make it contextually evident what applies to which flavor.

The following assumptions with regard to this installation have been made.

A valid support agreement allowing the system to register to the Red Hat Customer Portal and receive updates
The ability to enable additional RPM repositories, specifically the EPEL and Software Collections (SCL) repos
This system will have direct or proxy access to the Internet for updates. Or connected to a Red Hat Satellite Server
This document will bootstrap a MISP instance running over HTTPS. A full test of all features have yet to be done. The following GitHub issue details some shortcomings.

MISP configuration variables

If you are doing a manual install, copy and pasting from this document, please do the following before starting:

eval "$(curl -fsSL https://raw.githubusercontent.com/MISP/MISP/2.4/docs/generic/globalVariables.md | awk '/^# <snippet-begin/,0' | grep -v \`\`\`)"
MISPvars

!!! notice Do NOT leave your session after this mid-install as some initial passwords have been generated and thus would be lost. Consider using a mux like screen or tmux.

# <snippet-begin 0_global-vars.sh>
# $ eval "$(curl -fsSL https://raw.githubusercontent.com/MISP/MISP/2.4/docs/generic/globalVariables.md | awk '/^# <snippet-begin/,0' | grep -v \`\`\`)"
# $ MISPvars
MISPvars () {
  debug "Setting generic ${LBLUE}MISP${NC} variables shared by all flavours" 2> /dev/null
  # Some distros have no openssl installed by default, catch that exception.
  $(openssl help 2> /dev/null) || (echo "No openssl, please install to continue"; exit -1)
  # Local non-root MISP user
  MISP_USER="${MISP_USER:-misp}"
  MISP_PASSWORD="${MISP_PASSWORD:-$(openssl rand -hex 32)}"

  # Cheap distribution detector
  FLAVOUR="$(. /etc/os-release && echo "$ID"| tr '[:upper:]' '[:lower:]')"
  STREAM="$(. /etc/os-release && echo "$NAME"| grep -o -i stream |tr '[:upper:]' '[:lower:]')"
  DIST_VER="$(. /etc/os-release && echo "$VERSION_ID")"
  DISTRI=${FLAVOUR}${DIST_VER}${STREAM}

  # The web server user
  # RHEL/CentOS
  if [[ -f "/etc/redhat-release" ]]; then
    SE_LINUX=$(sestatus  -v -b |grep "^SELinux status"| grep enabled ; echo $?)
    WWW_USER="apache"
    SUDO_WWW="sudo -H -u ${WWW_USER} "
  # Debian flavoured
  elif [[ -f "/etc/debian_version" ]]; then
    WWW_USER="www-data"
    SUDO_WWW="sudo -H -u ${WWW_USER} "
  # OpenBSD
  elif [[ "$(uname -s)" == "OpenBSD" ]]; then
    WWW_USER="www"
    PATH_TO_MISP="${PATH_TO_MISP:-/var/www/htdocs/MISP}"
    SUDO_WWW="doas -u www "
    SUDO_CMD="doas "
  # NetBSD
  elif [[ "$(uname -s)" == "NetBSD" ]]; then
    WWW_USER="www"
    PATH_TO_MISP="$PATH_TO_MISP:-/usr/pkg/share/httpd/htdocs/MISP}"
    SUDO_WWW="sudo -H -u ${WWW_USER} "
  else
    # I am feeling lucky
    WWW_USER="www-data"
    SUDO_WWW="sudo -H -u ${WWW_USER} "
  fi

  # MISP configuration variables
  PATH_TO_MISP="${PATH_TO_MISP:-/var/www/MISP}"
  PATH_TO_MISP_SCRIPTS="${PATH_TO_MISP}/app/files/scripts"
  ## For future use
  # TMPDIR="${TMPDIR:-$PATH_TO_MISP/app/tmp}"

  FQDN="${FQDN:-misp.local}"

  MISP_BASEURL="${MISP_BASEURL:-""}"

  MISP_LIVE="1"

  # Database configuration
  DBHOST="${DBHOST:-localhost}"
  DBNAME="${DBNAME:-misp}"
  DBUSER_ADMIN="${DBUSER_ADMIN:-root}"
  DBPASSWORD_ADMIN="${DBPASSWORD_ADMIN:-$(openssl rand -hex 32)}"
  DBUSER_MISP="${DBUSER_MISP:-misp}"
  DBPASSWORD_MISP="${DBPASSWORD_MISP:-$(openssl rand -hex 32)}"

  # OpenSSL configuration
  OPENSSL_CN=${FQDN}
  OPENSSL_C="LU"
  OPENSSL_ST="State"
  OPENSSL_L="Location"
  OPENSSL_O="Organization"
  OPENSSL_OU="Organizational Unit"
  OPENSSL_EMAILADDRESS="info@${FQDN}"

  # GPG configuration
  GPG_REAL_NAME="Autogenerated Key"
  # On a REAL install, please do not set a comment, see here for why: https://www.debian-administration.org/users/dkg/weblog/97
  GPG_COMMENT="WARNING: MISP AutoGenerated Key consider this Key VOID!"
  GPG_EMAIL_ADDRESS="admin@admin.test"
  # 3072 bits used as per suggestions here: https://riseup.net/en/security/message-security/openpgp/best-practices
  GPG_KEY_LENGTH="3072"
  GPG_PASSPHRASE="$(openssl rand -hex 32)"

  # debug alias to make sure people are not confused when blindly copy pasting blobs of code
  alias debug="echo -e"

  # checkAptLock alias to make sure people are not confused when blindly copy pasting blobs of code
  alias checkAptLock="echo 'Function used in Installer to make sure apt is not locked'"

  # php.ini configuration
  upload_max_filesize="50M"
  post_max_size="50M"
  max_execution_time="300"
  memory_limit="2048M"
  session0sid_length="32"
  session0use_strict_mode="1"

  CAKE="${PATH_TO_MISP}/app/Console/cake"

  # sudo config to run $LUSER commands
  if [[ "$(groups ${MISP_USER} |grep -o 'staff')" == "staff" ]]; then
    SUDO_CMD="sudo -H -u ${MISP_USER} -g staff"
  else
    SUDO_CMD="sudo -H -u ${MISP_USER}"
  fi
  
  echo "The following DB Passwords were generated..."
  echo "Admin (${DBUSER_ADMIN}) DB Password: ${DBPASSWORD_ADMIN}"
  echo "User  (${DBUSER_MISP}) DB Password: ${DBPASSWORD_MISP}"
}
# <snippet-end 0_global-vars.sh>

!!! note For fresh installs the following tips might be handy.
Allow ssh to pass the firewall on the CLI bash firewall-cmd --zone=public --add-port=22/tcp --permanent firewall-cmd --reload
To quickly make sure if NetworkManager handles your network interface on boot, check in the following location: /etc/sysconfig/network-scripts/ifcfg-*

1/ OS Install and additional repositories

1.1/ Complete a minimal RHEL/CentOS installation, configure IP address to connect automatically.

1.2/ Configure system hostname (if not done during install)

sudo hostnamectl set-hostname misp.local # Your choice, in a production environment, it's best to use a FQDN

1.3/ [RHEL] Register the system for updates with Red Hat Subscription Manager

# <snippet-begin 0_RHEL_register.sh>
registerRHEL () {
  sudo subscription-manager register --auto-attach # register your system to an account and attach to a current subscription
}
# <snippet-end 0_RHEL_register.sh>

1.4/ [RHEL] Enable the optional, extras and Software Collections (SCL) repos

# <snippet-begin 0_RHEL7_SCL.sh>
enableReposRHEL7 () {
  sudo subscription-manager refresh
  sudo subscription-manager repos --enable rhel-7-server-optional-rpms
  sudo subscription-manager repos --enable rhel-7-server-extras-rpms
}
# <snippet-end 0_RHEL7_SCL.sh>

1.4c/ [CentOS] Enable EPEL for additional dependencies

# <snippet-begin 0_CentOS_EPEL.sh>
centosEPEL () {
  # We need some packages from the Extra Packages for Enterprise Linux repository
  sudo yum install dnf -y
  sudo dnf install epel-release -y

  # Since MISP 2.4 PHP 5.5 is a minimal requirement, so we need a newer version than CentOS base provides
  # Software Collections is a way do to this, see https://wiki.centos.org/AdditionalResources/Repositories/SCL
  sudo dnf install centos-release-scl -y
  sudo dnf install yum-utils -y
  sudo dnf install http://rpms.remirepo.net/enterprise/remi-release-7.rpm -y
  sudo yum-config-manager --enable remi-php74
}
# <snippet-end 0_CentOS_EPEL.sh>

1.5a/ Install the deltarpm package to help reduce download size when installing updates (optional)

sudo dnf install deltarpm -y

1.5.b/ Install vim (optional)

# Because (neo)vim is just so practical
sudo dnf install neovim -y
# For RHEL, it's vim and after enabling epel neovim is available too

1.5.c/ Install ntpdate (optional)

# In case you time is wrong, this will fix it.
sudo dnf install ntpdate -y
sudo ntpdate pool.ntp.org

1.5/ Update the system and reboot

# <snippet-begin 0_yum-update.sh>
yumUpdate () {
  sudo dnf update -y
}
# <snippet-end 0_yum-update.sh>

1.6/ [RHEL] Install the EPEL and remi repo

# <snippet-begin 0_RHEL7_EPEL.sh>
enableEPEL () {
  sudo yum install dnf -y
  sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm -y
  sudo dnf install http://rpms.remirepo.net/enterprise/remi-release-7.rpm -y
  sudo dnf install yum-utils policycoreutils-python -y
  sudo yum-config-manager --enable remi-php74
}
# <snippet-end 0_RHEL7_EPEL.sh>

2/ Dependencies

!!! note This guide installs PHP 7.4 from Remi’s repo

!!! warning PHP 5.6 and 7.0 aren’t supported since December 2018. Please update accordingly. In the future only PHP7 will be supported.

2.01/ Install some base system dependencies

# <snippet-begin 0_yumInstallCoreDeps7.sh>
yumInstallCoreDeps7 () {
  # Install the dependencies:
  PHP_BASE="/etc/"
  PHP_INI="/etc/php.ini"
  sudo dnf install gcc git zip unzip \
                   mod_ssl \
                   moreutils \
                   redis \
                   libxslt-devel zlib-devel ssdeep-devel -y

  # Enable and start redis
  sudo systemctl enable --now redis.service

  # Install MariaDB
  sudo dnf install wget -y
  wget https://downloads.mariadb.com/MariaDB/mariadb_repo_setup && chmod +x mariadb_repo_setup && sudo ./mariadb_repo_setup && rm mariadb_repo_setup
  sudo dnf install MariaDB-server -y

  # Install PHP 7.4 from Remi's repo, see https://rpms.remirepo.net/enterprise/7/php74/x86_64/repoview/
  sudo dnf install php php-fpm php-devel \
                   php-mysqlnd \
                   php-mbstring \
                   php-xml \
                   php-bcmath \
                   php-opcache \
                   php-zip \
                   php-pear \
                   php-brotli \
                   php-intl \
                   php-gd -y

  # cake has php baked in, thus we link to it if necessary.
  [[ ! -e "/usr/bin/php" ]] && sudo ln -s /usr/bin/php74 /usr/bin/php

  # Python 3.6 is now available in RHEL 7.7 base
  sudo dnf install python3 python3-devel python3-virtualenv -y

  sudo systemctl enable --now php-fpm.service
}
# <snippet-end 0_yumInstallCoreDeps7.sh>

# <snippet-begin 0_yumInstallHaveged.sh>
installEntropyRHEL () {
  # GPG needs lots of entropy, haveged provides entropy
  # /!\ Only do this if you're not running rngd to provide randomness and your kernel randomness is not sufficient.
  sudo dnf install haveged -y
  sudo systemctl enable --now haveged.service
}
# <snippet-end 0_yumInstallHaveged.sh>

3/ MISP code

3.01/ Download MISP code using git in /var/www/ directory

# <snippet-begin 1_mispCoreInstall_RHEL7.sh>
installCoreRHEL7 () {
  # Download MISP using git in the $PATH_TO_MISP directory.
  sudo mkdir -p $(dirname $PATH_TO_MISP)
  sudo chown $WWW_USER:$WWW_USER $(dirname $PATH_TO_MISP)
  cd $(dirname $PATH_TO_MISP)
  $SUDO_WWW git clone https://github.com/MISP/MISP.git
  cd $PATH_TO_MISP

  # Fetch submodules
  $SUDO_WWW git submodule sync
  $SUDO_WWW git submodule update --init --recursive
  # Make git ignore filesystem permission differences for submodules
  $SUDO_WWW git submodule foreach --recursive git config core.filemode false
  # Make git ignore filesystem permission differences
  $SUDO_WWW git config core.filemode false

  # Create a python3 virtualenv
  [[ -e $(which virtualenv-3 2>/dev/null) ]] && $SUDO_WWW virtualenv-3 -p python3 $PATH_TO_MISP/venv
  [[ -e $(which virtualenv 2>/dev/null) ]] && $SUDO_WWW virtualenv -p python3 $PATH_TO_MISP/venv
  $SUDO_WWW python3 -m venv $PATH_TO_MISP/venv
  sudo mkdir /usr/share/httpd/.cache
  sudo chown $WWW_USER:$WWW_USER /usr/share/httpd/.cache
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U pip setuptools

  # If you umask is has been changed from the default, it is a good idea to reset it to 0022 before installing python modules
  UMASK=$(umask)
  umask 0022

  # install python-stix dependencies
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install ordered-set python-dateutil six weakrefmethod

  # install zmq
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U zmq

  # install redis
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U redis

  # install magic, pydeep, lief
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U python-magic git+https://github.com/kbandla/pydeep.git plyara lief

  # install PyMISP
  cd $PATH_TO_MISP/PyMISP
  $SUDO_WWW $PATH_TO_MISP/venv/bin/pip install -U .

  # FIXME: Remove libfaup etc once the egg has the library baked-in
  # BROKEN: This needs to be tested on RHEL/CentOS
  sudo dnf install libcaca-devel cmake3 -y
  cd /tmp
  [[ ! -d "faup" ]] && $SUDO_CMD git clone https://github.com/stricaud/faup.git faup
  [[ ! -d "gtcaca" ]] && $SUDO_CMD git clone https://github.com/stricaud/gtcaca.git gtcaca
  sudo chown -R ${MISP_USER}:${MISP_USER} faup gtcaca
  cd gtcaca
  $SUDO_CMD mkdir -p build
  cd build
  $SUDO_CMD cmake3 .. && $SUDO_CMD make
  sudo make install
  cd ../../faup
  $SUDO_CMD mkdir -p build
  cd build
  $SUDO_CMD cmake3 .. && $SUDO_CMD make
  sudo make install
  sudo ldconfig

  # Enable dependencies detection in the diagnostics page
  # This allows MISP to detect GnuPG, the Python modules' versions and to read the PHP settings.
  echo "env[PATH] = /usr/local/bin:/usr/bin:/bin" |sudo tee -a ${PHP_BASE}/php-fpm.d/www.conf
  sudo sed -i.org -e 's/^;\(clear_env = no\)/\1/' ${PHP_BASE}/php-fpm.d/www.conf
  sudo sed -i.org -e 's/^\(listen =\) \/run\/php-fpm\/www\.sock/\1 127.0.0.1:9000/' ${PHP_BASE}/php-fpm.d/www.conf

  sudo systemctl restart php-fpm.service
  umask $UMASK
}
# <snippet-end 1_mispCoreInstall_RHEL7.sh>

4/ CakePHP

4.01/ Install CakeResque along with its dependencies if you intend to use the built in background jobs

!!! notice CakePHP is now included as a submodule of MISP and has been fetch by a previous step.

# <snippet-begin 1_installCake_RHEL.sh>
installCake_RHEL ()
{
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP
  sudo mkdir /usr/share/httpd/.composer
  sudo chown $WWW_USER:$WWW_USER /usr/share/httpd/.composer
  cd $PATH_TO_MISP/app
  $SUDO_WWW php composer.phar install

  sudo dnf install php-pecl-redis php-pecl-ssdeep php-pecl-gnupg -y

  sudo systemctl restart php-fpm.service

  # If you have not yet set a timezone in php.ini
  echo 'date.timezone = "Asia/Tokyo"' |sudo tee /etc/php-fpm.d/timezone.ini
  sudo ln -s ../php-fpm.d/timezone.ini /etc/php.d/99-timezone.ini

  # Recommended: Change some PHP settings in /etc/php.ini
  # max_execution_time = 300
  # memory_limit = 2048M
  # upload_max_filesize = 50M
  # post_max_size = 50M
  for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
  do
      sudo sed -i "s/^\($key\).*/\1 = $(eval echo \${$key})/" $PHP_INI
  done
  sudo sed -i "s/^\(session.sid_length\).*/\1 = $(eval echo \${session0sid_length})/" $PHP_INI
  sudo sed -i "s/^\(session.use_strict_mode\).*/\1 = $(eval echo \${session0use_strict_mode})/" $PHP_INI
  sudo systemctl restart php-fpm.service

  # To use the scheduler worker for scheduled tasks, do the following:
  sudo cp -fa $PATH_TO_MISP/INSTALL/setup/config.php $PATH_TO_MISP/app/Plugin/CakeResque/Config/config.php
}
# <snippet-end 1_installCake_RHEL.sh>

5/ Set file permissions

# <snippet-begin 2_permissions_RHEL7.sh>
# Main function to fix permissions to something sane
permissions_RHEL7 () {
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP
  ## ? chown -R root:$WWW_USER $PATH_TO_MISP
  sudo find $PATH_TO_MISP -type d -exec chmod g=rx {} \;
  sudo chmod -R g+r,o= $PATH_TO_MISP
  ## **Note :** For updates through the web interface to work, apache must own the $PATH_TO_MISP folder and its subfolders as shown above, which can lead to security issues. If you do not require updates through the web interface to work, you can use the following more restrictive permissions :
  sudo chmod -R 750 $PATH_TO_MISP
  sudo chmod -R g+xws $PATH_TO_MISP/app/tmp
  sudo chmod -R g+ws $PATH_TO_MISP/app/files
  sudo chmod -R g+ws $PATH_TO_MISP/app/files/scripts/tmp
  sudo chmod -R g+rw $PATH_TO_MISP/venv
  sudo chmod -R g+rw $PATH_TO_MISP/.git
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files/terms
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/files/scripts/tmp
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Plugin/CakeResque/tmp
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Config
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/tmp
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/img/orgs
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/img/custom
}
# <snippet-end 2_permissions_RHEL7.sh>

6/ Create database and user

6.01/ Set database to listen on localhost only

# <snippet-begin 1_prepareDB_RHEL.sh>
prepareDB_RHEL () {
  sudo systemctl enable --now mariadb.service
  echo [mysqld] |sudo tee /etc/my.cnf.d/bind-address.cnf
  echo bind-address=127.0.0.1 |sudo tee -a /etc/my.cnf.d/bind-address.cnf
  sudo systemctl restart mariadb

  # Kill the anonymous users
  sudo mysql -h $DBHOST -e "DROP USER IF EXISTS ''@'localhost'"
  # Because our hostname varies we'll use some Bash magic here.
  sudo mysql -h $DBHOST -e "DROP USER IF EXISTS ''@'$(hostname)'"
  # Kill off the demo database
  sudo mysql -h $DBHOST -e "DROP DATABASE IF EXISTS test"
  # No root remote logins
  sudo mysql -h $DBHOST -e "DELETE FROM mysql.user WHERE User='root' AND Host NOT IN ('localhost', '127.0.0.1', '::1')"
  # Make sure that NOBODY can access the server without a password
  sudo mysqladmin -h $DBHOST -u "${DBUSER_ADMIN}" password "${DBPASSWORD_ADMIN}"
  # Make our changes take effect
  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "FLUSH PRIVILEGES"

  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "CREATE DATABASE ${DBNAME};"
  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "CREATE USER '${DBUSER_MISP}'@'localhost' IDENTIFIED BY '${DBPASSWORD_MISP}';"
  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "GRANT USAGE ON *.* to '${DBUSER_MISP}'@'localhost';"
  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "GRANT ALL PRIVILEGES on ${DBNAME}.* to '${DBUSER_MISP}'@'localhost';"
  sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "FLUSH PRIVILEGES;"
  # Import the empty MISP database from MYSQL.sql
  ${SUDO_WWW} cat ${PATH_TO_MISP}/INSTALL/MYSQL.sql | mysql -h $DBHOST -u "${DBUSER_MISP}" -p"${DBPASSWORD_MISP}" ${DBNAME}
}
# <snippet-end 1_prepareDB_RHEL.sh>

7/ Apache Configuration

!!! notice SELinux note, to check if it is running: bash $ sestatus SELinux status: disabled If it is disabled, you can ignore the chcon/setsebool/semanage/checkmodule/semodule* commands.

# <snippet-begin 1_apacheConfig_RHEL7.sh>
apacheConfig_RHEL7 () {
  # Now configure your apache server with the DocumentRoot $PATH_TO_MISP/app/webroot/
  # A sample vhost can be found in $PATH_TO_MISP/INSTALL/apache.misp.centos7

  sudo cp $PATH_TO_MISP/INSTALL/apache.misp.centos7.ssl /etc/httpd/conf.d/misp.ssl.conf
  #sudo sed -i "s/SetHandler/\#SetHandler/g" /etc/httpd/conf.d/misp.ssl.conf
  sudo rm /etc/httpd/conf.d/ssl.conf
  sudo chmod 644 /etc/httpd/conf.d/misp.ssl.conf
  if ! grep -x "Listen 443" /etc/httpd/conf/httpd.conf; then
  sudo sed -i '/Listen 80/a Listen 443' /etc/httpd/conf/httpd.conf
  fi

  # If a valid SSL certificate is not already created for the server, create a self-signed certificate:
  echo "The Common Name used below will be: ${OPENSSL_CN}"
  # This will take a rather long time, be ready. (13min on a VM, 8GB Ram, 1 core)
  if [[ ! -e "/etc/pki/tls/certs/dhparam.pem" ]]; then
    sudo openssl dhparam -out /etc/pki/tls/certs/dhparam.pem 4096
  fi
  sudo openssl genrsa -des3 -passout pass:xxxx -out /tmp/misp.local.key 4096
  sudo openssl rsa -passin pass:xxxx -in /tmp/misp.local.key -out /etc/pki/tls/private/misp.local.key
  sudo rm /tmp/misp.local.key
  sudo openssl req -new -subj "/C=${OPENSSL_C}/ST=${OPENSSL_ST}/L=${OPENSSL_L}/O=${OPENSSL_O}/OU=${OPENSSL_OU}/CN=${OPENSSL_CN}/emailAddress=${OPENSSL_EMAILADDRESS}" -key /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.csr
  sudo openssl x509 -req -days 365 -in /etc/pki/tls/certs/misp.local.csr -signkey /etc/pki/tls/private/misp.local.key -out /etc/pki/tls/certs/misp.local.crt
  sudo ln -s /etc/pki/tls/certs/misp.local.csr /etc/pki/tls/certs/misp-chain.crt
  cat /etc/pki/tls/certs/dhparam.pem |sudo tee -a /etc/pki/tls/certs/misp.local.crt

  sudo systemctl restart httpd.service

  # Since SELinux is enabled, we need to allow httpd to write to certain directories
  sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files
  sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/terms
  sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/scripts/tmp
  sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Plugin/CakeResque/tmp
  sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/Console/cake
  sudo sh -c "chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/Console/worker/*.sh"
  sudo sh -c "chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/files/scripts/*.py"
  sudo sh -c "chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/files/scripts/*/*.py"
  sudo chcon -t httpd_sys_script_exec_t $PATH_TO_MISP/app/Vendor/pear/crypt_gpg/scripts/crypt-gpg-pinentry
  sudo sh -c "chcon -R -t bin_t $PATH_TO_MISP/venv/bin/*"
  sudo find $PATH_TO_MISP/venv -type f -name "*.so*" -or -name "*.so.*" | xargs sudo chcon -t lib_t
  # Only run these if you want to be able to update MISP from the web interface
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/.git
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/tmp
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Lib
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Config
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/webroot/img/orgs
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/webroot/img/custom
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/app/files/scripts/mispzmq
}
# <snippet-end 1_apacheConfig_RHEL7.sh>

!!! warning Todo: Revise all permissions so update in Web UI works.

# <snippet-begin 1_firewall_RHEL.sh>
firewall_RHEL () {
  # Allow httpd to connect to the redis server and php-fpm over tcp/ip
  sudo setsebool -P httpd_can_network_connect on

  # Allow httpd to send emails from php
  sudo setsebool -P httpd_can_sendmail on

  # Enable and start the httpd service
  sudo systemctl enable --now httpd.service

  # Open a hole in the iptables firewall
  sudo firewall-cmd --zone=public --add-port=80/tcp --permanent
  sudo firewall-cmd --zone=public --add-port=443/tcp --permanent
  sudo firewall-cmd --reload
}
# <snippet-end 1_firewall_RHEL.sh>

8/ Log Rotation

8.01/ Enable log rotation

MISP saves the stdout and stderr of its workers in $PATH_TO_MISP/app/tmp/logs To rotate these logs install the supplied logrotate script:

FIXME: The below does not work

# <snippet-begin 2_logRotation_RHEL.sh>
logRotation_RHEL () {
  # MISP saves the stdout and stderr of its workers in $PATH_TO_MISP/app/tmp/logs
  # To rotate these logs install the supplied logrotate script:

  sudo cp $PATH_TO_MISP/INSTALL/misp.logrotate /etc/logrotate.d/misp
  sudo chmod 0640 /etc/logrotate.d/misp

  # Now make logrotate work under SELinux as well
  # Allow logrotate to modify the log files
  sudo semanage fcontext -a -t httpd_sys_rw_content_t "$PATH_TO_MISP(/.*)?"
  sudo semanage fcontext -a -t httpd_log_t "$PATH_TO_MISP/app/tmp/logs(/.*)?"
  sudo chcon -R -t httpd_log_t $PATH_TO_MISP/app/tmp/logs
  # Impact of the following: ?!?!?!!?111
  ##sudo restorecon -R $PATH_TO_MISP

  # Allow logrotate to read /var/www
  sudo checkmodule -M -m -o /tmp/misplogrotate.mod $PATH_TO_MISP/INSTALL/misplogrotate.te
  sudo semodule_package -o /tmp/misplogrotate.pp -m /tmp/misplogrotate.mod
  sudo semodule -i /tmp/misplogrotate.pp
}
# <snippet-end 2_logRotation_RHEL.sh>

9/ MISP Configuration

# <snippet-begin 2_configMISP_RHEL.sh>
configMISP_RHEL () {
  # There are 4 sample configuration files in $PATH_TO_MISP/app/Config that need to be copied
  $SUDO_WWW cp -a $PATH_TO_MISP/app/Config/bootstrap.default.php $PATH_TO_MISP/app/Config/bootstrap.php
  $SUDO_WWW cp -a $PATH_TO_MISP/app/Config/database.default.php $PATH_TO_MISP/app/Config/database.php
  $SUDO_WWW cp -a $PATH_TO_MISP/app/Config/core.default.php $PATH_TO_MISP/app/Config/core.php
  $SUDO_WWW cp -a $PATH_TO_MISP/app/Config/config.default.php $PATH_TO_MISP/app/Config/config.php

  echo "<?php
  class DATABASE_CONFIG {
          public \$default = array(
                  'datasource' => 'Database/Mysql',
                  //'datasource' => 'Database/Postgres',
                  'persistent' => false,
                  'host' => '$DBHOST',
                  'login' => '$DBUSER_MISP',
                  'port' => 3306, // MySQL & MariaDB
                  //'port' => 5432, // PostgreSQL
                  'password' => '$DBPASSWORD_MISP',
                  'database' => '$DBNAME',
                  'prefix' => '',
                  'encoding' => 'utf8',
          );
  }" | $SUDO_WWW tee $PATH_TO_MISP/app/Config/database.php

  # Configure the fields in the newly created files:
  # config.php   : baseurl (example: 'baseurl' => 'http://misp',) - don't use "localhost" it causes issues when browsing externally
  # core.php   : Uncomment and set the timezone: `// date_default_timezone_set('UTC');`
  # database.php : login, port, password, database
  # DATABASE_CONFIG has to be filled
  # With the default values provided in section 6, this would look like:
  # class DATABASE_CONFIG {
  #   public $default = array(
  #       'datasource' => 'Database/Mysql',
  #       'persistent' => false,
  #       'host' => 'localhost',
  #       'login' => 'misp', // grant usage on *.* to misp@localhost
  #       'port' => 3306,
  #       'password' => 'XXXXdbpasswordhereXXXXX', // identified by 'XXXXdbpasswordhereXXXXX';
  #       'database' => 'misp', // create database misp;
  #       'prefix' => '',
  #       'encoding' => 'utf8',
  #   );
  #}

  # Important! Change the salt key in $PATH_TO_MISP/app/Config/config.php
  # The admin user account will be generated on the first login, make sure that the salt is changed before you create that user
  # If you forget to do this step, and you are still dealing with a fresh installation, just alter the salt,
  # delete the user from mysql and log in again using the default admin credentials (admin@admin.test / admin)

  # If you want to be able to change configuration parameters from the webinterface:
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/Config/config.php
  sudo chmod 660 $PATH_TO_MISP/app/Config/config.php
  sudo chcon -t httpd_sys_rw_content_t $PATH_TO_MISP/app/Config/config.php

  # Generate a GPG encryption key.
  cat >/tmp/gen-key-script <<EOF
      %echo Generating a default key
      Key-Type: default
      Key-Length: $GPG_KEY_LENGTH
      Subkey-Type: default
      Name-Real: $GPG_REAL_NAME
      Name-Comment: $GPG_COMMENT
      Name-Email: $GPG_EMAIL_ADDRESS
      Expire-Date: 0
      Passphrase: $GPG_PASSPHRASE
      # Do a commit here, so that we can later print "done"
      %commit
      %echo done
EOF

  sudo gpg --homedir $PATH_TO_MISP/.gnupg --batch --gen-key /tmp/gen-key-script
  sudo rm -f /tmp/gen-key-script
  sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/.gnupg
  sudo chcon -R -t httpd_sys_rw_content_t $PATH_TO_MISP/.gnupg

  # And export the public key to the webroot
  sudo gpg --homedir $PATH_TO_MISP/.gnupg --export --armor $GPG_EMAIL_ADDRESS |sudo tee $PATH_TO_MISP/app/webroot/gpg.asc
  sudo chown $WWW_USER:$WWW_USER $PATH_TO_MISP/app/webroot/gpg.asc

  echo "Admin (root) DB Password: $DBPASSWORD_ADMIN"
  echo "User  (misp) DB Password: $DBPASSWORD_MISP"
}
# <snippet-end 2_configMISP_RHEL.sh>

!!! note There is a bug that if a passphrase is added MISP will produce an error on the diagnostic page.
/!\ THIS WANTS TO BE VERIFIED AND LINKED WITH A CORRESPONDING ISSUE.

!!! note The email address should match the one set in the config.php configuration file Make sure that you use the same settings in the MISP Server Settings tool

9.06/ Use MISP background workers

# <snippet-begin 3_configWorkers_RHEL.sh>
configWorkersRHEL () {
  echo "[Unit]
  Description=MISP background workers
  After=mariadb.service redis.service php-fpm.service

  [Service]
  Type=forking
  User=$WWW_USER
  Group=$WWW_USER
  ExecStart=$PATH_TO_MISP/app/Console/worker/start.sh
  Restart=always
  RestartSec=10

  [Install]
  WantedBy=multi-user.target" |sudo tee /etc/systemd/system/misp-workers.service

  sudo chmod +x $PATH_TO_MISP/app/Console/worker/start.sh
  sudo systemctl daemon-reload

  sudo systemctl enable --now misp-workers.service
}
# <snippet-end 3_configWorkers_RHEL.sh>

Initialize MISP configuration and set some defaults

# <snippet-begin 2_core-cake.sh>
# Core cake commands to tweak MISP and alleviate some of the configuration pains
# The ${RUN_PHP} is ONLY set on RHEL installs and can thus be ignored
# This file is NOT an excuse to NOT read the settings and familiarize ourselves with them ;)

coreCAKE () {
  debug "Running core Cake commands to set sane defaults for ${LBLUE}MISP${NC}"

  # IF you have logged in prior to running this, it will fail but the fail is NON-blocking
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} userInit -q

  # This makes sure all Database upgrades are done, without logging in.
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin runUpdates

  # The default install is Python >=3.6 in a virtualenv, setting accordingly
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python"

  # Set default role
  # TESTME: The following seem defunct, please test.
  # ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} setDefaultRole 3

  # Tune global time outs
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.autoRegenerate" 0
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.timeout" 600
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.cookieTimeout" 3600
 
  # Set the default temp dir
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.tmpdir" "${PATH_TO_MISP}/app/tmp"

  # Change base url, either with this CLI command or in the UI
  [[ ! -z ${MISP_BASEURL} ]] && ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Baseurl $MISP_BASEURL
  # example: 'baseurl' => 'https://<your.FQDN.here>',
  # alternatively, you can leave this field empty if you would like to use relative pathing in MISP
  # 'baseurl' => '',
  # The base url of the application (in the format https://www.mymispinstance.com) as visible externally/by other MISPs.
  # MISP will encode this URL in sharing groups when including itself. If this value is not set, the baseurl is used as a fallback.
  [[ ! -z ${MISP_BASEURL} ]] && ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.external_baseurl" ${MISP_BASEURL}

  # Enable GnuPG
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.email" "${GPG_EMAIL_ADDRESS}"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.homedir" "${PATH_TO_MISP}/.gnupg"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.password" "${GPG_PASSPHRASE}"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.obscure_subject" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.key_fetching_disabled" false
  # FIXME: what if we have not gpg binary but a gpg2 one?
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.binary" "$(which gpg)"

  # LinOTP
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.enabled" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.baseUrl" "https://<your-linotp-baseUrl>"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.realm" "lino"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.verifyssl" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.mixedauth" false

  # Enable installer org and tune some configurables
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.host_org_id" 1
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.email" "info@admin.test"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_emailing" true --force
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.contact" "info@admin.test"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disablerestalert" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.showCorrelationsOnIndex" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.default_event_tag_collection" 0

  # Provisional Cortex tunes
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_url" "http://127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_port" 9000
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_timeout" 120
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_authkey" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_verify_peer" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_verify_host" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_allow_self_signed" true

  # Various plugin sightings settings
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_policy" 0
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_anonymise" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_anonymise_as" 1
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_range" 365
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_sighting_db_enable" false

  # TODO: Fix the below list
  # Set API_Required modules to false
  PLUGS=(Plugin.Enrichment_cuckoo_submit_enabled
         Plugin.Enrichment_vmray_submit_enabled
         Plugin.Enrichment_circl_passivedns_enabled
         Plugin.Enrichment_circl_passivessl_enabled
         Plugin.Enrichment_domaintools_enabled
         Plugin.Enrichment_eupi_enabled
         Plugin.Enrichment_farsight_passivedns_enabled
         Plugin.Enrichment_passivetotal_enabled
         Plugin.Enrichment_passivetotal_enabled
         Plugin.Enrichment_virustotal_enabled
         Plugin.Enrichment_whois_enabled
         Plugin.Enrichment_shodan_enabled
         Plugin.Enrichment_geoip_asn_enabled
         Plugin.Enrichment_geoip_city_enabled
         Plugin.Enrichment_geoip_country_enabled
         Plugin.Enrichment_iprep_enabled
         Plugin.Enrichment_otx_enabled
         Plugin.Enrichment_vulndb_enabled
         Plugin.Enrichment_crowdstrike_falcon_enabled
         Plugin.Enrichment_onyphe_enabled
         Plugin.Enrichment_xforceexchange_enabled
         Plugin.Enrichment_vulners_enabled
         Plugin.Enrichment_macaddress_io_enabled
         Plugin.Enrichment_intel471_enabled
         Plugin.Enrichment_backscatter_io_enabled
         Plugin.Enrichment_hibp_enabled
         Plugin.Enrichment_greynoise_enabled
         Plugin.Enrichment_joesandbox_submit_enabled
         Plugin.Enrichment_virustotal_public_enabled
         Plugin.Enrichment_apiosintds_enabled
         Plugin.Enrichment_urlscan_enabled
         Plugin.Enrichment_securitytrails_enabled
         Plugin.Enrichment_apivoid_enabled
         Plugin.Enrichment_assemblyline_submit_enabled
         Plugin.Enrichment_assemblyline_query_enabled
         Plugin.Enrichment_ransomcoindb_enabled
         Plugin.Enrichment_lastline_query_enabled
         Plugin.Enrichment_sophoslabs_intelix_enabled
         Plugin.Enrichment_cytomic_orion_enabled
         Plugin.Enrichment_censys_enrich_enabled
         Plugin.Enrichment_trustar_enrich_enabled
         Plugin.Enrichment_recordedfuture_enabled
         Plugin.ElasticSearch_logging_enable
         Plugin.S3_enable)
  for PLUG in "${PLUGS[@]}"; do
    ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting ${PLUG} false 2> /dev/null
  done

  # Plugin CustomAuth tuneable
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.CustomAuth_disable_logout" false

  # RPZ Plugin settings
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_policy" "DROP"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_walled_garden" "127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_serial" "\$date00"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_refresh" "2h"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_retry" "30m"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_expiry" "30d"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_minimum_ttl" "1h"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ttl" "1w"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ns" "localhost."
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ns_alt" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_email" "root.localhost"

  # Kafka settings
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_brokers" "kafka:9092"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_rdkafka_config" "/etc/rdkafka.ini"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_include_attachments" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_notifications_topic" "misp_event"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_publish_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_publish_notifications_topic" "misp_event_publish"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_notifications_topic" "misp_object"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_reference_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_reference_notifications_topic" "misp_object_reference"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_attribute_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_attribute_notifications_topic" "misp_attribute"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_shadow_attribute_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_shadow_attribute_notifications_topic" "misp_shadow_attribute"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_tag_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_tag_notifications_topic" "misp_tag"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_sighting_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_sighting_notifications_topic" "misp_sighting"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_user_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_user_notifications_topic" "misp_user"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_organisation_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_organisation_notifications_topic" "misp_organisation"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_audit_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_audit_notifications_topic" "misp_audit"

  # ZeroMQ settings
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_host" "127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_port" 50000
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_host" "localhost"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_port" 6379
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_database" 1
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_namespace" "mispq"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_event_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_reference_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_attribute_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_sighting_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_user_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_organisation_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_include_attachments" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_tag_notifications_enable" false

  # Force defaults to make MISP Server Settings less RED
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.language" "eng"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.proposals_block_attributes" false

  # Redis block
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_host" "127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_port" 6379
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_database" 13
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_password" ""

  # Force defaults to make MISP Server Settings less YELLOW
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.ssdeep_correlation_threshold" 40
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.extended_alert_subject" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.default_event_threat_level" 4
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.newUserText" "Dear new MISP user,\\n\\nWe would hereby like to welcome you to the \$org MISP community.\\n\\n Use the credentials below to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nPassword: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.passwordResetText" "Dear MISP user,\\n\\nA password reset has been triggered for your account. Use the below provided temporary password to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nYour temporary password: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.enableEventBlocklisting" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.enableOrgBlocklisting" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_client_ip" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_auth" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_user_ips" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_user_ips_authkeys" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disableUserSelfManagement" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_login_change" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_password_change" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_add" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_event_alert" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_event_alert_tag" "no-alerts=\"true\""
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert_age" ""
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert_by_date" ""
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban_threshold" 5
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban_refresh_on_retry" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.incoming_tags_disabled_by_default" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.maintenance_message" "Great things are happening! MISP is undergoing maintenance, but will return shortly. You can contact the administration at \$email."
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.footermidleft" "This is an initial install"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.footermidright" "Please configure and harden accordingly"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.welcome_text_top" "Initial Install, please configure"
  # TODO: Make sure $FLAVOUR is correct
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.welcome_text_bottom" "Welcome to MISP on ${FLAVOUR}, change this message in MISP Settings"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.attachments_dir" "${PATH_TO_MISP}/app/files"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.download_attachments_on_load" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_metadata_only" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.title_text" "MISP"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.terms_download" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.showorgalternate" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_view_filter_fields" "id, uuid, value, comment, type, category, Tag.name"

  # Force defaults to make MISP Server Settings less GREEN
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "debug" 0
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.auth_enforced" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.log_each_individual_auth_fail" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.rest_client_baseurl" ""
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.advanced_authkeys" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.password_policy_length" 12
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.password_policy_complexity" '/^((?=.*\d)|(?=.*\W+))(?![\n])(?=.*[A-Z])(?=.*[a-z]).*$|.{16,}/'
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.self_registration_message" "If you would like to send us a registration request, please fill out the form below. Make sure you fill out as much information as possible in order to ease the task of the administrators."

  # Appease the security audit, #hardening
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.disable_browser_cache" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.check_sec_fetch_site_header" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.csp_enforce" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.advanced_authkeys" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.do_not_log_authkeys" true

  # Appease the security audit, #loggin
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.username_in_response_header" true

  # It is possible to updateMISP too, only here for reference how to to that on the CLI.
  ## ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateMISP

  # Set MISP Live
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Live ${MISP_LIVE}
}

# This updates Galaxies, ObjectTemplates, Warninglists, Noticelists, Templates
updateGOWNT () {
  # AUTH_KEY Place holder in case we need to **curl** something in the future
  # 
  ${SUDO_WWW} ${RUN_MYSQL} -- mysql -h ${DBHOST} -u ${DBUSER_MISP} -p${DBPASSWORD_MISP} misp -e "SELECT authkey FROM users;" | tail -1 > /tmp/auth.key
  AUTH_KEY=$(cat /tmp/auth.key)
  rm /tmp/auth.key

  debug "Updating Galaxies, ObjectTemplates, Warninglists, Noticelists and Templates"
  # Update the galaxies…
  # TODO: Fix updateGalaxies
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateGalaxies
  # Updating the taxonomies…
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateTaxonomies
  # Updating the warning lists…
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateWarningLists
  # Updating the notice lists…
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateNoticeLists
  # Updating the object templates…
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateObjectTemplates "1337"
}
# <snippet-end 2_core-cake.sh>

9.07/ misp-modules

# <snippet-begin 3_misp-modules_RHEL.sh>
mispmodulesRHEL () {
  # some misp-modules dependencies for RHEL<8
  [[ "${DIST_VER}" =~ ^[7].* ]] && sudo dnf install openjpeg-devel gcc-c++ poppler-cpp-devel pkgconfig python3-devel redhat-rpm-config -y

  # some misp-modules dependencies for RHEL8
  ([[ "${DISTRI}" == "fedora33" ]] || [[ "${DISTRI}" == "fedora34" ]] || [[ "${DIST_VER}" =~ ^[8].* ]]) && sudo dnf install openjpeg2-devel gcc-c++ poppler-cpp-devel pkgconfig python3-devel redhat-rpm-config -y

  sudo chmod 2777 /usr/local/src
  sudo chown root:users /usr/local/src
  cd /usr/local/src/
  false; while [[ $? -ne 0 ]]; do ${SUDO_WWW} git clone https://github.com/MISP/misp-modules.git; done
  cd misp-modules
  # pip install
  ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install -U -I -r REQUIREMENTS
  ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install -U .
  ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install pyfaup censys
  # some misp-modules dependencies for RHEL<8
  ([[ "${DISTRI}" == "fedora33" ]] || [[ "${DIST_VER}" =~ ^[7].* ]]) && sudo dnf install rubygem-rouge rubygem-asciidoctor zbar-devel opencv-devel -y
  # some misp-modules dependencies for RHEL8
  [[ "${DIST_VER}" =~ ^[8].* ]] && sudo dnf install https://packages.endpointdev.com/rhel/8/main/x86_64/endpoint-repo.noarch.rpm -y && sudo dnf install zbar-devel opencv-devel -y

  echo "[Unit]
  Description=MISP modules
  After=misp-workers.service

  [Service]
  Type=simple
  User=${WWW_USER}
  Group=${WWW_USER}
  WorkingDirectory=/usr/local/src/misp-modules
  Environment="PATH=/var/www/MISP/venv/bin"
  ExecStart=\"${PATH_TO_MISP}/venv/bin/misp-modules -l 127.0.0.1 -s\"
  Restart=always
  RestartSec=10

  [Install]
  WantedBy=multi-user.target" |sudo tee /etc/systemd/system/misp-modules.service

  sudo systemctl daemon-reload
  # Test misp-modules
  ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/misp-modules -l 127.0.0.1 -s &
  sudo systemctl enable --now misp-modules
}
# <snippet-end 3_misp-modules_RHEL.sh>

# <snippet-begin 3_misp-modules-cake.sh>
modulesCAKE () {
  # Enable Enrichment, set better timeouts
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_popover_only" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_timeout" 150
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_timeout" 300
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_bgpranking_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_countrycode_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cve_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cve_advanced_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cpe_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_dns_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_eql_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_btc_steroids_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ipasn_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_reversedns_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_yara_syntax_validator_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_yara_query_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_wiki_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_threatminer_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_threatcrowd_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hashdd_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_rbl_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_sigma_syntax_validator_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_stix2_pattern_syntax_validator_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_sigma_queries_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_dbl_spamhaus_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_btc_scam_check_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_macvendors_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_qrcode_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ocr_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_pdf_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_docx_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_xlsx_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_pptx_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ods_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_odt_enrich_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_urlhaus_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_malwarebazaar_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_html_to_markdown_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_socialscan_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_url" "http://127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_port" 6666

  # Enable Import modules, set better timeout
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_url" "http://127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_port" 6666
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_timeout" 300
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_ocr_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_mispjson_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_openiocimport_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_threatanalyzer_import_enabled" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_csvimport_enabled" true

  # Enable Export modules, set better timeout
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_url" "http://127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_port" 6666
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_timeout" 300
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_pdfexport_enabled" true
}
# <snippet-end 3_misp-modules-cake.sh>

MISP Dashboard on Rocky Linux

!!! warning A valid MaxMind DB key is required.

!!! warning Does not work fully on RHEL 8

# <snippet-begin 4_misp-dashboardRHEL.sh>
# Main MISP Dashboard install function
mispDashboard () {
  sudo dnf install wget screen -y
  sudo mkdir /var/www/misp-dashboard
  sudo chown ${WWW_USER}:${WWW_USER} /var/www/misp-dashboard
  false; while [[ $? -ne 0 ]]; do ${SUDO_WWW} git clone https://github.com/MISP/misp-dashboard.git /var/www/misp-dashboard; done
  cd /var/www/misp-dashboard
  sudo sed -i -E 's/sudo apt/#sudo apt/' install_dependencies.sh
  sudo -H /var/www/misp-dashboard/install_dependencies.sh
  sudo sed -i "s/^host\ =\ localhost/host\ =\ 0.0.0.0/g" /var/www/misp-dashboard/config/config.cfg
  sudo sed -i '/Listen 80/a Listen 0.0.0.0:8001' /etc/httpd/conf/httpd.conf
  # TODO: Check if this works on 7.x
  [[ "${DIST_VER}" =~ ^[7].* ]] && sudo dnf install rh-python36-mod_wsgi -y
  [[ "${DIST_VER}" =~ ^[7].* ]] && sudo cp /opt/rh/httpd24/root/usr/lib64/httpd/modules/mod_rh-python36-wsgi.so /etc/httpd/modules/
  [[ "${DIST_VER}" =~ ^[7].* ]] && sudo cp /opt/rh/httpd24/root/etc/httpd/conf.modules.d/10-rh-python36-wsgi.conf /etc/httpd/conf.modules.d/
  ([[ "${DISTRI}" == "fedora33" ]] || [[ "${DIST_VER}" =~ ^[8].* ]]) && sudo dnf install python3-mod_wsgi -y

  echo "<VirtualHost *:8001>
      ServerAdmin admin@misp.local
      ServerName misp.local
      DocumentRoot /var/www/misp-dashboard

      WSGIDaemonProcess misp-dashboard \
         user=misp group=misp \
         python-home=/var/www/misp-dashboard/DASHENV \
         processes=1 \
         threads=15 \
         maximum-requests=5000 \
         listen-backlog=100 \
         queue-timeout=45 \
         socket-timeout=60 \
         connect-timeout=15 \
         request-timeout=60 \
         inactivity-timeout=0 \
         deadlock-timeout=60 \
         graceful-timeout=15 \
         eviction-timeout=0 \
         shutdown-timeout=5 \
         send-buffer-size=0 \
         receive-buffer-size=0 \
         header-buffer-size=0 \
         response-buffer-size=0 \
         server-metrics=Off
      WSGIScriptAlias / /var/www/misp-dashboard/misp-dashboard.wsgi
      <Directory /var/www/misp-dashboard>
          WSGIProcessGroup misp-dashboard
          WSGIApplicationGroup %{GLOBAL}
          Require all granted
      </Directory>
      LogLevel info
      ErrorLog /var/log/httpd/misp-dashboard.local_error.log
      CustomLog /var/log/httpd/misp-dashboard.local_access.log combined
      ServerSignature Off
  </VirtualHost>" | sudo tee /etc/httpd/conf.d/misp-dashboard.conf

  sudo semanage port -a -t http_port_t -p tcp 8001
  sudo systemctl restart httpd.service

  # Add misp-dashboard to rc.local to start on boot.
  sudo sed -i -e '$i \sudo -u apache bash /var/www/misp-dashboard/start_all.sh > /tmp/misp-dashboard_rc.local.log\n' /etc/rc.local
}
# <snippet-end 4_misp-dashboardRHEL.sh>

# <snippet-begin 4_misp-dashboard-cake.sh>
dashboardCAKE () {
  # Enable ZeroMQ for misp-dashboard
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_host" "127.0.0.1"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_port" 50000
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_host" "localhost"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_port" 6379
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_database" 1
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_namespace" "mispq"
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_include_attachments" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_event_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_reference_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_attribute_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_tag_notifications_enable" false
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_sighting_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_user_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_organisation_notifications_enable" true
  ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_audit_notifications_enable" false
}
# <snippet-end 4_misp-dashboard-cake.sh>

!!! warning If you have installed the recommended Python 3 virtualenv to the recommended place of ${PATH_TO_MISP}/venv set the following MISP configurable bash sudo -H -u www-data $CAKE Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python" or on Rocky Linux bash sudo -u apache $RUN_PHP "$CAKE Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python""

!!! warning Make sure that the STIX libraries and GnuPG work as intended, if not, refer to the relevant sections in the install guide you are currently reading.

!!! notice Now log in using the webinterface: http://misp/users/login
The default user/pass = admin@admin.test/admin
Using the server settings tool in the admin interface (Administration -> Server Settings), set MISP up to your preference.
It is especially vital that no critical issues remain!
Don’t forget to change the email, password and authentication key after installation.
Once done, have a look at the diagnostics.

!!! notice If any of the directories that MISP uses to store files is not writeable to the apache user, change the permissions
you can do this by running the following commands: bash chmod -R 750 ${PATH_TO_MISP}/<directory path with an indicated issue> # /!\ Depending on your OS replace www-data with apache or www or whatever user is the web server user. chown -R www-data:www-data ${PATH_TO_MISP}/<directory path with an indicated issue>

!!! notice If anything goes wrong, make sure that you check MISP’s logs for errors: # ${PATH_TO_MISP}/app/tmp/logs/error.log # ${PATH_TO_MISP}/app/tmp/logs/resque-worker-error.log # ${PATH_TO_MISP}/app/tmp/logs/resque-scheduler-error.log # ${PATH_TO_MISP}/app/tmp/logs/resque-2018-10-25.log //where the actual date is the current date

Recommended actions

By default CakePHP exposes its name and version in email headers. Apply a patch to remove this behavior.
You should really harden your OS
You should really harden the configuration of Apache
You should really harden the configuration of MySQL
Keep your software up2date (MISP, CakePHP and everything else)
Log and audit

11/ Known Issues

11.01/ Workers cannot be started or restarted from the web page

Possible also due to package being installed via SCL, attempting to start workers through the web page will result in error. Worker’s can be restarted via the CLI using the following command.

systemctl restart misp-workers.service

!!! note No other functions were tested after the conclusion of this install. There may be issue that aren’t addressed
via this guide and will need additional investigation.

Hardening a base system

Intro

MISP is a web-based information sharing platform, by design it is kept rather simple and hardening can be done by following the common best practices.

Bare in mind that neither the MISP documentation efforts or the core MISP project can give you the ultimate guide on how to harden your system. This is not the purpose of the MISP Project but the purpose and care of those individuals and organizations deploying MISP Instances.

Nevertheless here is a very rough food for thoughts bulletpoint list for you to consider, and a list of some hardening resources below.

Are we using SSL by default? (Especially when syncing over the internet and exposing the API)
How to we access the machine remotely? Via ssh? What is the path to get there? Does a bastion host make sense?
Is the machine shared with other user accounts? Do I need to care about useri-land security due to this sharing?
Is the instance deployed in the “cloud”? Is it a VPS? AWS? docker? ansible? kubernetes? whateverCloudContainterMagicIsFancibleNow?
Do we need to encrypt the partitions where some data is stored?
Are we redundant in case one MISP instance might fail?
Is the database server and any other servers running on the machine bound to localhost? Do we need to expose because our setup is more complex?
Do we have enough storage? What about MISP and size estimation anyways?
Do we care about BIOS updates?
Do we care about physical access to the servers? (Disabling USB ports etc…)
Is any fancy management engine à la IME in use?

Apache

To make Apache less verbose in terms of sending banners, the belo might help.

diff --git a/apache2/conf-available/security.conf b/apache2/conf-available/security.conf
index f9f69d4..2e8fd78 100644
--- a/apache2/conf-available/security.conf
+++ b/apache2/conf-available/security.conf
@@ -22,7 +22,7 @@
 # Set to one of:  Full | OS | Minimal | Minor | Major | Prod
 # where Full conveys the most information, and Prod the least.
 #ServerTokens Minimal
-ServerTokens OS
+ServerTokens Prod
 #ServerTokens Full
 
 #
@@ -33,7 +33,7 @@ ServerTokens OS
 # Set to "EMail" to also include a mailto: link to the ServerAdmin.
 # Set to one of:  On | Off | EMail
 #ServerSignature Off
-ServerSignature On
+ServerSignature Off
 
 #
 # Allow TRACE method

Resources

IT Security Guidelines for TLS by NCSC.nl

Weak Diffie-Hellman and the Logjam Attack

Debian Wiki Hardening

CentOS Hardening

Apache Hardened Webserver

Some Linux hardening tips

This site is open source. Improve this page.