!!! notice This document also serves as a source for the INSTALL-misp.sh script. Which explains why you will see the use of shell functions in various steps. You will see bash-functions in various steps. You can either copy between the {}’s or copy the entire function and just run it. Henceforth the document will also follow a more logical flow. In the sense that all the dependencies are installed first then config files are generated, etc…
To install MISP all you need to do is the following on a clean supported distribution.
!!! notice
```bash
# Please check the installer options first to make the best choice for your install
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh
# This will install MISP Core
wget --no-cache -O /tmp/INSTALL.sh https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh
bash /tmp/INSTALL.sh -c
```
Make sure you are reading the parsed version of this Document. When in doubt click here.
!!! notice Installer tested working by @SteveClement on 20230502.
!!! notice
If the next line is [!generic/core.md!]() click here.
!!! notice
Maintained and tested by the MISP core team.
Enjoy installing MISP. For any issues see here
# <snippet-begin 0_apt-upgrade.sh>
aptUpgrade () {
debug "Upgrading system"
checkAptLock
# If we run in non-interactive mode, make sure we do not stop all of a sudden
if [[ "${PACKER}" == "1" || "${UNATTENDED}" == "1" ]]; then
export DEBIAN_FRONTEND=noninteractive
export DEBIAN_PRIORITY=critical
sudo -E apt-get -qy -o "Dpkg::Options::=--force-confdef" -o "Dpkg::Options::=--force-confold" upgrade
sudo -E apt-get -qy autoclean
else
sudo apt-get upgrade -qy
fi
}
# <snippet-end 0_apt-upgrade.sh>
# <snippet-begin 0_sudoKeeper.sh>
# check if sudo is installed
checkSudoKeeper () {
echo "Checking for sudo and installing etckeeper"
if [[ ! -f $(which sudo) ]]; then
echo "Please enter your root password below to install etckeeper"
su -c "apt install etckeeper -y"
echo "Please enter your root password below to install sudo"
su -c "apt install sudo -y"
echo "Please enter your root password below to install sudo"
su -c "apt install curl -y"
echo "Please enter your root password below to add ${MISP_USER} to sudo group"
su -c "/usr/sbin/adduser ${MISP_USER} sudo"
echo "We added ${MISP_USER} to group sudo and now we need to log out and in again."
exit
else
sudo apt update
sudo apt install etckeeper -y
fi
}
# <snippet-end 0_sudoKeeper.sh>
# <snippet-begin add-user.sh>
## FIXME: This function is a duplicate included in: # <snippet-begin 0_support-functions.sh>
# check is /usr/local/src is RW by misp user
checkUsrLocalSrc () {
echo ""
if [[ -e /usr/local/src ]]; then
WRITEABLE=$(sudo -H -u $MISP_USER touch /usr/local/src 2> /dev/null ; echo $?)
if [[ "$WRITEABLE" == "0" ]]; then
echo "Good, /usr/local/src exists and is writeable as $MISP_USER"
else
# TODO: The below might be shorter, more elegant and more modern
#[[ -n $KALI ]] || [[ -n $UNATTENDED ]] && echo "Just do it"
sudo chmod 2775 /usr/local/src
sudo chown root:staff /usr/local/src
fi
else
echo "/usr/local/src does not exist, creating."
mkdir -p /usr/local/src
sudo chmod 2775 /usr/local/src
# TODO: Better handling /usr/local/src permissions
if [[ "$(cat /etc/group |grep staff > /dev/null 2>&1)" == "0" ]]; then
sudo chown root:staff /usr/local/src
fi
fi
}
# <snippet-end add-user.sh>
This will bring back ‘ethX’ e.g: eth0
# <snippet-end interfaces.sh>
GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"
DEFAULT_GRUB=/etc/default/grub
echo "--- Using old style name (ethX) for interfaces"
#for key in GRUB_CMDLINE_LINUX
#do
# sudo sed -i "s/^\($key\)=.*/\1=\"$(eval echo \${$key})\"/" $DEFAULT_GRUB
#done
sed -r 's/^(GRUB_CMDLINE_LINUX=).*/\1\"net\.ifnames=0\ biosdevname=0\"/' /etc/default/grub | sudo tee /etc/default/grub > /dev/null
# install ifupdown since ubuntu 18.04
sudo apt-get update
sudo apt-get install -y ifupdown
# enable eth0
echo "--- Configuring eth0"
echo "# The primary network interface
auto eth0
iface eth0 inet dhcp" | sudo tee /etc/network/interfaces
sudo grub-mkconfig -o /boot/grub/grub.cfg
sudo update-grub > /dev/null 2>&1
# <snippet-end interfaces.sh>
!!! notice
On recent Ubuntu install Netplan is default and you might need to change the Network name in its respective config file.
sudo sed -i "s/enp0s3/eth0/" /etc/netplan/50-cloud-init.yaml
OR on Ubuntu 19.04 (yay for changing this every 5 commits… #n00bs)
sudo sed -i "s/enp0s3/eth0/" /etc/netplan/01-netcfg.yaml
OR on Ubuntu 22.04
sudo sed -i "s/enp0s3/eth0/" /etc/netplan/00-installer-config.yaml
# <snippet-begin postfix.sh>
sudo apt-get install postfix dialog -qy
# <snippet-end postfix.sh>
!!! notice
Postfix Configuration: Satellite system
change the relay server later with:
bash
sudo postconf -e 'relayhost = example.com'
sudo postfix reload
If you are doing a manual install, copy and pasting from this document, please do the following before starting:
eval "$(curl -fsSL https://raw.githubusercontent.com/MISP/MISP/2.4/docs/generic/globalVariables.md | awk '/^# <snippet-begin/,0' | grep -v \`\`\`)"
MISPvars
!!! notice Do NOT leave your session after this mid-install as some initial passwords have been generated and thus would be lost. Consider using a mux like screen or tmux.
# <snippet-begin 0_global-vars.sh>
# $ eval "$(curl -fsSL https://raw.githubusercontent.com/MISP/MISP/2.4/docs/generic/globalVariables.md | awk '/^# <snippet-begin/,0' | grep -v \`\`\`)"
# $ MISPvars
MISPvars () {
debug "Setting generic ${LBLUE}MISP${NC} variables shared by all flavours" 2> /dev/null
# Some distros have no openssl installed by default, catch that exception.
$(openssl help 2> /dev/null) || (echo "No openssl, please install to continue"; exit -1)
# Local non-root MISP user
MISP_USER="${MISP_USER:-misp}"
MISP_PASSWORD="${MISP_PASSWORD:-$(openssl rand -hex 32)}"
# Cheap distribution detector
FLAVOUR="$(. /etc/os-release && echo "$ID"| tr '[:upper:]' '[:lower:]')"
STREAM="$(. /etc/os-release && echo "$NAME"| grep -o -i stream |tr '[:upper:]' '[:lower:]')"
DIST_VER="$(. /etc/os-release && echo "$VERSION_ID")"
DISTRI=${FLAVOUR}${DIST_VER}${STREAM}
# The web server user
# RHEL/CentOS
if [[ -f "/etc/redhat-release" ]]; then
SE_LINUX=$(sestatus -v -b |grep "^SELinux status"| grep enabled ; echo $?)
WWW_USER="apache"
SUDO_WWW="sudo -H -u ${WWW_USER} "
# Debian flavoured
elif [[ -f "/etc/debian_version" ]]; then
WWW_USER="www-data"
SUDO_WWW="sudo -H -u ${WWW_USER} "
# OpenBSD
elif [[ "$(uname -s)" == "OpenBSD" ]]; then
WWW_USER="www"
PATH_TO_MISP="${PATH_TO_MISP:-/var/www/htdocs/MISP}"
SUDO_WWW="doas -u www "
SUDO_CMD="doas "
# NetBSD
elif [[ "$(uname -s)" == "NetBSD" ]]; then
WWW_USER="www"
PATH_TO_MISP="$PATH_TO_MISP:-/usr/pkg/share/httpd/htdocs/MISP}"
SUDO_WWW="sudo -H -u ${WWW_USER} "
else
# I am feeling lucky
WWW_USER="www-data"
SUDO_WWW="sudo -H -u ${WWW_USER} "
fi
# MISP configuration variables
PATH_TO_MISP="${PATH_TO_MISP:-/var/www/MISP}"
PATH_TO_MISP_SCRIPTS="${PATH_TO_MISP}/app/files/scripts"
## For future use
# TMPDIR="${TMPDIR:-$PATH_TO_MISP/app/tmp}"
FQDN="${FQDN:-misp.local}"
MISP_BASEURL="${MISP_BASEURL:-""}"
MISP_LIVE="1"
# Database configuration
DBHOST="${DBHOST:-localhost}"
DBNAME="${DBNAME:-misp}"
DBUSER_ADMIN="${DBUSER_ADMIN:-root}"
DBPASSWORD_ADMIN="${DBPASSWORD_ADMIN:-$(openssl rand -hex 32)}"
DBUSER_MISP="${DBUSER_MISP:-misp}"
DBPASSWORD_MISP="${DBPASSWORD_MISP:-$(openssl rand -hex 32)}"
# OpenSSL configuration
OPENSSL_CN=${FQDN}
OPENSSL_C="LU"
OPENSSL_ST="State"
OPENSSL_L="Location"
OPENSSL_O="Organization"
OPENSSL_OU="Organizational Unit"
OPENSSL_EMAILADDRESS="info@${FQDN}"
# GPG configuration
GPG_REAL_NAME="Autogenerated Key"
# On a REAL install, please do not set a comment, see here for why: https://www.debian-administration.org/users/dkg/weblog/97
GPG_COMMENT="WARNING: MISP AutoGenerated Key consider this Key VOID!"
GPG_EMAIL_ADDRESS="admin@admin.test"
# 3072 bits used as per suggestions here: https://riseup.net/en/security/message-security/openpgp/best-practices
GPG_KEY_LENGTH="3072"
GPG_PASSPHRASE="$(openssl rand -hex 32)"
# debug alias to make sure people are not confused when blindly copy pasting blobs of code
alias debug="echo -e"
# checkAptLock alias to make sure people are not confused when blindly copy pasting blobs of code
alias checkAptLock="echo 'Function used in Installer to make sure apt is not locked'"
# php.ini configuration
upload_max_filesize="50M"
post_max_size="50M"
max_execution_time="300"
memory_limit="2048M"
session0sid_length="32"
session0use_strict_mode="1"
CAKE="${PATH_TO_MISP}/app/Console/cake"
# sudo config to run $LUSER commands
if [[ "$(groups ${MISP_USER} |grep -o 'staff')" == "staff" ]]; then
SUDO_CMD="sudo -H -u ${MISP_USER} -g staff"
else
SUDO_CMD="sudo -H -u ${MISP_USER}"
fi
echo "The following DB Passwords were generated..."
echo "Admin (${DBUSER_ADMIN}) DB Password: ${DBPASSWORD_ADMIN}"
echo "User (${DBUSER_MISP}) DB Password: ${DBPASSWORD_MISP}"
}
# <snippet-end 0_global-vars.sh>
Once the system is installed you can perform the following steps.
# <snippet-begin 0_installCoreDeps.sh>
installCoreDeps () {
debug "Installing core dependencies"
# Install the dependencies: (some might already be installed)
sudo apt-get install curl gcc git gpg-agent make python3 openssl redis-server sudo vim zip unzip virtualenv libfuzzy-dev sqlite3 moreutils -qy
# Install MariaDB (a MySQL fork/alternative)
sudo apt-get install mariadb-client mariadb-server -qy
# Install Apache2
sudo apt-get install apache2 apache2-doc apache2-utils -qy
# install Mitre's STIX and its dependencies by running the following commands:
sudo apt-get install python3-dev python3-pip libxml2-dev libxslt1-dev zlib1g-dev python-setuptools -qy
}
# <snippet-end 0_installCoreDeps.sh>
# <snippet-begin 0_installDepsPhp74.sh>
# Install Php 7.4 dependencies
installDepsPhp74 () {
debug "Installing PHP 7.4 dependencies"
PHP_ETC_BASE=/etc/php/7.4
PHP_INI=${PHP_ETC_BASE}/apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php7.4 \
php7.4 php7.4-cli \
php7.4-dev \
php7.4-json php7.4-xml php7.4-mysql php7.4-opcache php7.4-readline php7.4-mbstring php7.4-zip php7.4-curl \
php7.4-redis php7.4-gnupg \
php7.4-intl php7.4-bcmath \
php7.4-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i "s/^\($key\).*/\1 = $(eval echo \${$key})/" $PHP_INI
done
sudo sed -i "s/^\(session.sid_length\).*/\1 = $(eval echo \${session0sid_length})/" $PHP_INI
sudo sed -i "s/^\(session.use_strict_mode\).*/\1 = $(eval echo \${session0use_strict_mode})/" $PHP_INI
}
# <snippet-end 0_installDepsPhp74.sh>
# <snippet-begin 1_mispCoreInstall.sh>
installCore () {
debug "Installing ${LBLUE}MISP${NC} core"
# Download MISP using git in the /var/www/ directory.
if [[ ! -d ${PATH_TO_MISP} ]]; then
sudo mkdir ${PATH_TO_MISP}
sudo chown ${WWW_USER}:${WWW_USER} ${PATH_TO_MISP}
false; while [[ $? -ne 0 ]]; do checkAptLock; ${SUDO_WWW} git clone https://github.com/MISP/MISP.git ${PATH_TO_MISP}; done
false; while [[ $? -ne 0 ]]; do checkAptLock; ${SUDO_WWW} git -C ${PATH_TO_MISP} submodule update --progress --init --recursive; done
# Make git ignore filesystem permission differences for submodules
${SUDO_WWW} git -C ${PATH_TO_MISP} submodule foreach --recursive git config core.filemode false
# Make git ignore filesystem permission differences
${SUDO_WWW} git -C ${PATH_TO_MISP} config core.filemode false
# Create a python3 virtualenv
${SUDO_WWW} virtualenv -p python3 ${PATH_TO_MISP}/venv
# make pip happy
sudo mkdir /var/www/.cache/
sudo chown ${WWW_USER}:${WWW_USER} /var/www/.cache
# install python-stix dependencies
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install ordered-set python-dateutil six weakrefmethod
debug "Install misp-stix"
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install ${PATH_TO_MISP}/app/files/scripts/misp-stix
debug "Install PyMISP"
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install ${PATH_TO_MISP}/PyMISP
# FIXME: Remove libfaup etc once the egg has the library baked-in
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
cd /tmp
false; while [[ $? -ne 0 ]]; do [[ ! -d "faup" ]] && ${SUDO_CMD} git clone https://github.com/stricaud/faup.git faup; done
false; while [[ $? -ne 0 ]]; do [[ ! -d "gtcaca" ]] && ${SUDO_CMD} git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${MISP_USER}:${MISP_USER} faup gtcaca
cd gtcaca
${SUDO_CMD} mkdir -p build
cd build
${SUDO_CMD} cmake .. && ${SUDO_CMD} make
sudo make install
cd ../../faup
${SUDO_CMD} mkdir -p build
cd build
${SUDO_CMD} cmake .. && ${SUDO_CMD} make
sudo make install
sudo ldconfig
# install pydeep
false; while [[ $? -ne 0 ]]; do checkAptLock; ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install git+https://github.com/kbandla/pydeep.git; done
# install lief
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install lief
# install zmq needed by mispzmq
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install zmq redis
# install python-magic
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install python-magic
# install plyara
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install plyara
else
debug "Trying to git pull existing install"
${SUDO_WWW} git pull -C ${PATH_TO_MISP}
false; while [[ $? -ne 0 ]]; do ${SUDO_WWW} git -C ${PATH_TO_MISP} submodule update --progress --init --recursive; done
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install -U ${PATH_TO_MISP}/PyMISP
false; while [[ $? -ne 0 ]]; do checkAptLock; ${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install -U git+https://github.com/kbandla/pydeep.git; done
fi
}
# <snippet-end 1_mispCoreInstall.sh>
# <snippet-begin 1_installCake.sh>
installCake () {
debug "Installing CakePHP"
# Make composer cache happy
# /!\ composer on Ubuntu when invoked with sudo -u doesn't set $HOME to /var/www but keeps it /home/misp \!/
sudo mkdir -p /var/www/.composer ; sudo chown ${WWW_USER}:${WWW_USER} /var/www/.composer
${SUDO_WWW} sh -c "cd ${PATH_TO_MISP}/app ;php composer.phar install --no-dev"
# Enable CakeResque with php-redis
sudo phpenmod redis
sudo phpenmod gnupg
# To use the scheduler worker for scheduled tasks, do the following:
${SUDO_WWW} cp -fa ${PATH_TO_MISP}/INSTALL/setup/config.php ${PATH_TO_MISP}/app/Plugin/CakeResque/Config/config.php
# If you have multiple MISP instances on the same system, don't forget to have a different Redis per MISP instance for the CakeResque workers
# The default Redis port can be updated in Plugin/CakeResque/Config/config.php
}
# <snippet-end 1_installCake.sh>
# <snippet-begin 2_permissions.sh>
# Main function to fix permissions to something sane
permissions () {
debug "Setting permissions"
sudo chown -R ${WWW_USER}:${WWW_USER} ${PATH_TO_MISP}
sudo chmod -R 750 ${PATH_TO_MISP}
sudo chmod -R g+ws ${PATH_TO_MISP}/app/tmp
sudo chmod -R g+ws ${PATH_TO_MISP}/app/files
sudo chmod -R g+ws ${PATH_TO_MISP}/app/files/scripts/tmp
}
# <snippet-end 2_permissions.sh>
# <snippet-begin 1_prepareDB.sh>
prepareDB () {
if sudo test ! -e "/var/lib/mysql/mysql/"; then
#Make sure initial tables are created in MySQL
debug "Install mysql tables"
sudo mysql_install_db --user=mysql --basedir=/usr --datadir=/var/lib/mysql
sudo service mysql start
fi
if sudo test ! -e "/var/lib/mysql/misp/"; then
debug "Start mysql"
sudo service mysql start
debug "Setting up database"
# Kill the anonymous users
sudo mysql -h $DBHOST -e "DROP USER IF EXISTS ''@'localhost'"
# Because our hostname varies we'll use some Bash magic here.
sudo mysql -h $DBHOST -e "DROP USER IF EXISTS ''@'$(hostname)'"
# Kill off the demo database
sudo mysql -h $DBHOST -e "DROP DATABASE IF EXISTS test"
# No root remote logins
sudo mysql -h $DBHOST -e "DELETE FROM mysql.user WHERE User='root' AND Host NOT IN ('localhost', '127.0.0.1', '::1')"
# Make sure that NOBODY can access the server without a password
sudo mysqladmin -h $DBHOST -u "${DBUSER_ADMIN}" password "${DBPASSWORD_ADMIN}"
# Make our changes take effect
sudo mysql -h $DBHOST -e "FLUSH PRIVILEGES"
sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "CREATE DATABASE ${DBNAME};"
sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "CREATE USER '${DBUSER_MISP}'@'localhost' IDENTIFIED BY '${DBPASSWORD_MISP}';"
sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "GRANT USAGE ON *.* to '${DBUSER_MISP}'@'localhost';"
sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "GRANT ALL PRIVILEGES on ${DBNAME}.* to '${DBUSER_MISP}'@'localhost';"
sudo mysql -h $DBHOST -u "${DBUSER_ADMIN}" -p"${DBPASSWORD_ADMIN}" -e "FLUSH PRIVILEGES;"
# Import the empty MISP database from MYSQL.sql
${SUDO_WWW} cat ${PATH_TO_MISP}/INSTALL/MYSQL.sql | mysql -h $DBHOST -u "${DBUSER_MISP}" -p"${DBPASSWORD_MISP}" ${DBNAME}
fi
}
# <snippet-end 1_prepareDB.sh>
Now configure your Apache webserver with the DocumentRoot ${PATH_TO_MISP}/app/webroot/
!!! notice Be aware that the configuration files for apache 2.4 and up have changed. The configuration file has to have the .conf extension in the sites-available directory For more information, visit http://httpd.apache.org/docs/2.4/upgrading.html
# <snippet-begin 1_apacheConfig.sh>
apacheConfig () {
debug "Generating Apache config, if this hangs, make sure you have enough entropy (install: haveged or wait)"
sudo cp ${PATH_TO_MISP}/INSTALL/apache.24.misp.ssl /etc/apache2/sites-available/misp-ssl.conf
if [[ ! -z ${MISP_BASEURL} ]] && [[ "$(echo $MISP_BASEURL|cut -f 1 -d :)" == "http" || "$(echo $MISP_BASEURL|cut -f 1 -d :)" == "https" ]]; then
echo "Potentially replacing misp.local with $MISP_BASEURL in misp-ssl.conf"
fi
# If a valid SSL certificate is not already created for the server,
# create a self-signed certificate:
sudo openssl req -newkey rsa:4096 -days 365 -nodes -x509 \
-subj "/C=${OPENSSL_C}/ST=${OPENSSL_ST}/L=${OPENSSL_L}/O=${OPENSSL_O}/OU=${OPENSSL_OU}/CN=${OPENSSL_CN}/emailAddress=${OPENSSL_EMAILADDRESS}" \
-keyout /etc/ssl/private/misp.local.key -out /etc/ssl/private/misp.local.crt
# Enable modules, settings, and default of SSL in Apache
sudo a2dismod status
sudo a2enmod ssl
sudo a2enmod rewrite
sudo a2enmod headers
sudo a2dissite 000-default
sudo a2ensite default-ssl
# Apply all changes
sudo systemctl restart apache2
# activate new vhost
sudo a2dissite default-ssl
sudo a2ensite misp-ssl
# Restart apache
sudo systemctl restart apache2
}
# <snippet-end 1_apacheConfig.sh>
!!! notice
Please find a sample conf file for an SSL enabled conf file in-line below (alternatively use one of the samples provided in /var/www/MISP/INSTALL).
Also remember to verify the SSLCertificateChainFile property in your config file.
This is usually commented out for the self-generated certificate in the sample configurations, such as the one pasted below.
Otherwise, copy the SSLCertificateFile, SSLCertificateKeyFile, and SSLCertificateChainFile to /etc/ssl/private/. (Modify path and config to fit your environment)
============================================= Begin sample working SSL config for MISP
<VirtualHost <IP, FQDN, or *>:80>
ServerName <your.FQDN.here>
Redirect permanent / https://<your.FQDN.here>
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
</VirtualHost>
<VirtualHost <IP, FQDN, or *>:443>
ServerAdmin admin@<your.FQDN.here>
ServerName <your.FQDN.here>
DocumentRoot /var/www/MISP/app/webroot
<Directory /var/www/MISP/app/webroot>
Options -Indexes
AllowOverride all
Order allow,deny
allow from all
</Directory>
SSLEngine On
SSLCertificateFile /etc/ssl/private/misp.local.crt
SSLCertificateKeyFile /etc/ssl/private/misp.local.key
# SSLCertificateChainFile /etc/ssl/private/misp-chain.crt
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
</VirtualHost>
============================================= End sample working SSL config for MISP
# <snippet-begin 2_logRotation.sh>
logRotation () {
# MISP saves the stdout and stderr of its workers in ${PATH_TO_MISP}/app/tmp/logs
# To rotate these logs install the supplied logrotate script:
sudo cp ${PATH_TO_MISP}/INSTALL/misp.logrotate /etc/logrotate.d/misp
sudo chmod 0640 /etc/logrotate.d/misp
}
# <snippet-end 2_logRotation.sh>
# <snippet-begin 2_configMISP.sh>
configMISP () {
debug "Generating ${LBLUE}MISP${NC} config files"
# There are 4 sample configuration files in ${PATH_TO_MISP}/app/Config that need to be copied
${SUDO_WWW} cp -a ${PATH_TO_MISP}/app/Config/bootstrap.default.php ${PATH_TO_MISP}/app/Config/bootstrap.php
${SUDO_WWW} cp -a ${PATH_TO_MISP}/app/Config/database.default.php ${PATH_TO_MISP}/app/Config/database.php
${SUDO_WWW} cp -a ${PATH_TO_MISP}/app/Config/core.default.php ${PATH_TO_MISP}/app/Config/core.php
${SUDO_WWW} cp -a ${PATH_TO_MISP}/app/Config/config.default.php ${PATH_TO_MISP}/app/Config/config.php
echo "<?php
class DATABASE_CONFIG {
public \$default = array(
'datasource' => 'Database/Mysql',
//'datasource' => 'Database/Postgres',
'persistent' => false,
'host' => '$DBHOST',
'login' => '$DBUSER_MISP',
'port' => 3306, // MySQL & MariaDB
//'port' => 5432, // PostgreSQL
'password' => '$DBPASSWORD_MISP',
'database' => '$DBNAME',
'prefix' => '',
'encoding' => 'utf8',
);
}" | ${SUDO_WWW} tee ${PATH_TO_MISP}/app/Config/database.php
# Important! Change the salt key in ${PATH_TO_MISP}/app/Config/config.php
# The salt key must be a string at least 32 bytes long.
# The admin user account will be generated on the first login, make sure that the salt is changed before you create that user
# If you forget to do this step, and you are still dealing with a fresh installation, just alter the salt,
# delete the user from mysql and log in again using the default admin credentials (admin@admin.test / admin)
# and make sure the file permissions are still OK
sudo chown -R ${WWW_USER}:${WWW_USER} ${PATH_TO_MISP}/app/Config
sudo chmod -R 750 ${PATH_TO_MISP}/app/Config
}
# <snippet-end 2_configMISP.sh>
# <snippet-begin 2_gnupg.sh>
# Generate GnuPG key
setupGnuPG () {
if [ ! -d $PATH_TO_MISP/.gnupg ]; then
# The email address should match the one set in the config.php
# set in the configuration menu in the administration menu configuration file
echo "%echo Generating a default key
Key-Type: default
Key-Length: $GPG_KEY_LENGTH
Subkey-Type: default
Name-Real: $GPG_REAL_NAME
Name-Comment: $GPG_COMMENT
Name-Email: $GPG_EMAIL_ADDRESS
Expire-Date: 0
Passphrase: $GPG_PASSPHRASE
# Do a commit here, so that we can later print "done"
%commit
%echo done" > /tmp/gen-key-script
$SUDO_WWW gpg --homedir $PATH_TO_MISP/.gnupg --batch --gen-key /tmp/gen-key-script
# Export the public key to the webroot
$SUDO_WWW sh -c "gpg --homedir $PATH_TO_MISP/.gnupg --export --armor $GPG_EMAIL_ADDRESS" | $SUDO_WWW tee $PATH_TO_MISP/app/webroot/gpg.asc
fi
}
# <snippet-end 2_gnupg.sh>
!!! notice
If entropy is not high enough, you can install havegd and then start the service
bash
sudo apt install haveged -qy
sudo service haveged start
# <snippet-begin 2_backgroundWorkers.sh>
backgroundWorkers () {
debug "Setting up background workers"
# To make the background workers start on boot
sudo chmod +x ${PATH_TO_MISP}/app/Console/worker/start.sh
if [ ! -e /etc/rc.local ]
then
echo '#!/bin/sh -e' | sudo tee -a /etc/rc.local
echo 'exit 0' | sudo tee -a /etc/rc.local
sudo chmod u+x /etc/rc.local
fi
echo "[Unit]
Description=MISP background workers
After=network.target
[Service]
Type=forking
User=${WWW_USER}
Group=${WWW_USER}
ExecStart=${PATH_TO_MISP}/app/Console/worker/start.sh
Restart=always
RestartSec=10
[Install]
WantedBy=multi-user.target" | sudo tee /etc/systemd/system/misp-workers.service
sudo systemctl daemon-reload
sudo systemctl enable --now misp-workers
# Add the following lines before the last line (exit 0). Make sure that you replace www-data with your apache user:
sudo sed -i -e '$i \echo never > /sys/kernel/mm/transparent_hugepage/enabled\n' /etc/rc.local
sudo sed -i -e '$i \echo 1024 > /proc/sys/net/core/somaxconn\n' /etc/rc.local
sudo sed -i -e '$i \sysctl vm.overcommit_memory=1\n' /etc/rc.local
}
# <snippet-end 2_backgroundWorkers.sh>
echo "Admin (root) DB Password: $DBPASSWORD_ADMIN"
echo "User (misp) DB Password: $DBPASSWORD_MISP"
# <snippet-begin 2_core-cake.sh>
# Core cake commands to tweak MISP and alleviate some of the configuration pains
# The ${RUN_PHP} is ONLY set on RHEL installs and can thus be ignored
# This file is NOT an excuse to NOT read the settings and familiarize ourselves with them ;)
coreCAKE () {
debug "Running core Cake commands to set sane defaults for ${LBLUE}MISP${NC}"
# IF you have logged in prior to running this, it will fail but the fail is NON-blocking
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} userInit -q
# This makes sure all Database upgrades are done, without logging in.
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin runUpdates
# The default install is Python >=3.6 in a virtualenv, setting accordingly
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python"
# Set default role
# TESTME: The following seem defunct, please test.
# ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} setDefaultRole 3
# Tune global time outs
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.autoRegenerate" 0
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.timeout" 600
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Session.cookieTimeout" 3600
# Set the default temp dir
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.tmpdir" "${PATH_TO_MISP}/app/tmp"
# Change base url, either with this CLI command or in the UI
[[ ! -z ${MISP_BASEURL} ]] && ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Baseurl $MISP_BASEURL
# example: 'baseurl' => 'https://<your.FQDN.here>',
# alternatively, you can leave this field empty if you would like to use relative pathing in MISP
# 'baseurl' => '',
# The base url of the application (in the format https://www.mymispinstance.com) as visible externally/by other MISPs.
# MISP will encode this URL in sharing groups when including itself. If this value is not set, the baseurl is used as a fallback.
[[ ! -z ${MISP_BASEURL} ]] && ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.external_baseurl" ${MISP_BASEURL}
# Enable GnuPG
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.email" "${GPG_EMAIL_ADDRESS}"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.homedir" "${PATH_TO_MISP}/.gnupg"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.password" "${GPG_PASSPHRASE}"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.obscure_subject" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.key_fetching_disabled" false
# FIXME: what if we have not gpg binary but a gpg2 one?
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "GnuPG.binary" "$(which gpg)"
# LinOTP
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.enabled" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.baseUrl" "https://<your-linotp-baseUrl>"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.realm" "lino"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.verifyssl" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "LinOTPAuth.mixedauth" false
# Enable installer org and tune some configurables
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.host_org_id" 1
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.email" "info@admin.test"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_emailing" true --force
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.contact" "info@admin.test"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disablerestalert" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.showCorrelationsOnIndex" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.default_event_tag_collection" 0
# Provisional Cortex tunes
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_url" "http://127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_services_port" 9000
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_timeout" 120
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_authkey" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_verify_peer" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_verify_host" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Cortex_ssl_allow_self_signed" true
# Various plugin sightings settings
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_policy" 0
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_anonymise" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_anonymise_as" 1
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_range" 365
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Sightings_sighting_db_enable" false
# TODO: Fix the below list
# Set API_Required modules to false
PLUGS=(Plugin.Enrichment_cuckoo_submit_enabled
Plugin.Enrichment_vmray_submit_enabled
Plugin.Enrichment_circl_passivedns_enabled
Plugin.Enrichment_circl_passivessl_enabled
Plugin.Enrichment_domaintools_enabled
Plugin.Enrichment_eupi_enabled
Plugin.Enrichment_farsight_passivedns_enabled
Plugin.Enrichment_passivetotal_enabled
Plugin.Enrichment_passivetotal_enabled
Plugin.Enrichment_virustotal_enabled
Plugin.Enrichment_whois_enabled
Plugin.Enrichment_shodan_enabled
Plugin.Enrichment_geoip_asn_enabled
Plugin.Enrichment_geoip_city_enabled
Plugin.Enrichment_geoip_country_enabled
Plugin.Enrichment_iprep_enabled
Plugin.Enrichment_otx_enabled
Plugin.Enrichment_vulndb_enabled
Plugin.Enrichment_crowdstrike_falcon_enabled
Plugin.Enrichment_onyphe_enabled
Plugin.Enrichment_xforceexchange_enabled
Plugin.Enrichment_vulners_enabled
Plugin.Enrichment_macaddress_io_enabled
Plugin.Enrichment_intel471_enabled
Plugin.Enrichment_backscatter_io_enabled
Plugin.Enrichment_hibp_enabled
Plugin.Enrichment_greynoise_enabled
Plugin.Enrichment_joesandbox_submit_enabled
Plugin.Enrichment_virustotal_public_enabled
Plugin.Enrichment_apiosintds_enabled
Plugin.Enrichment_urlscan_enabled
Plugin.Enrichment_securitytrails_enabled
Plugin.Enrichment_apivoid_enabled
Plugin.Enrichment_assemblyline_submit_enabled
Plugin.Enrichment_assemblyline_query_enabled
Plugin.Enrichment_ransomcoindb_enabled
Plugin.Enrichment_lastline_query_enabled
Plugin.Enrichment_sophoslabs_intelix_enabled
Plugin.Enrichment_cytomic_orion_enabled
Plugin.Enrichment_censys_enrich_enabled
Plugin.Enrichment_trustar_enrich_enabled
Plugin.Enrichment_recordedfuture_enabled
Plugin.ElasticSearch_logging_enable
Plugin.S3_enable)
for PLUG in "${PLUGS[@]}"; do
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting ${PLUG} false 2> /dev/null
done
# Plugin CustomAuth tuneable
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.CustomAuth_disable_logout" false
# RPZ Plugin settings
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_policy" "DROP"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_walled_garden" "127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_serial" "\$date00"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_refresh" "2h"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_retry" "30m"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_expiry" "30d"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_minimum_ttl" "1h"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ttl" "1w"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ns" "localhost."
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_ns_alt" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.RPZ_email" "root.localhost"
# Kafka settings
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_brokers" "kafka:9092"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_rdkafka_config" "/etc/rdkafka.ini"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_include_attachments" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_notifications_topic" "misp_event"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_publish_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_event_publish_notifications_topic" "misp_event_publish"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_notifications_topic" "misp_object"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_reference_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_object_reference_notifications_topic" "misp_object_reference"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_attribute_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_attribute_notifications_topic" "misp_attribute"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_shadow_attribute_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_shadow_attribute_notifications_topic" "misp_shadow_attribute"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_tag_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_tag_notifications_topic" "misp_tag"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_sighting_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_sighting_notifications_topic" "misp_sighting"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_user_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_user_notifications_topic" "misp_user"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_organisation_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_organisation_notifications_topic" "misp_organisation"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_audit_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Kafka_audit_notifications_topic" "misp_audit"
# ZeroMQ settings
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_host" "127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_port" 50000
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_host" "localhost"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_port" 6379
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_database" 1
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_namespace" "mispq"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_event_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_reference_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_attribute_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_sighting_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_user_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_organisation_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_include_attachments" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_tag_notifications_enable" false
# Force defaults to make MISP Server Settings less RED
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.language" "eng"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.proposals_block_attributes" false
# Redis block
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_host" "127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_port" 6379
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_database" 13
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.redis_password" ""
# Force defaults to make MISP Server Settings less YELLOW
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.ssdeep_correlation_threshold" 40
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.extended_alert_subject" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.default_event_threat_level" 4
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.newUserText" "Dear new MISP user,\\n\\nWe would hereby like to welcome you to the \$org MISP community.\\n\\n Use the credentials below to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nPassword: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.passwordResetText" "Dear MISP user,\\n\\nA password reset has been triggered for your account. Use the below provided temporary password to log into MISP at \$misp, where you will be prompted to manually change your password to something of your own choice.\\n\\nUsername: \$username\\nYour temporary password: \$password\\n\\nIf you have any questions, don't hesitate to contact us at: \$contact.\\n\\nBest regards,\\nYour \$org MISP support team"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.enableEventBlocklisting" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.enableOrgBlocklisting" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_client_ip" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_auth" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_user_ips" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.log_user_ips_authkeys" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disableUserSelfManagement" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_login_change" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_password_change" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.disable_user_add" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_event_alert" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_event_alert_tag" "no-alerts=\"true\""
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert_age" ""
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.block_old_event_alert_by_date" ""
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban_threshold" 5
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_republish_ban_refresh_on_retry" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.incoming_tags_disabled_by_default" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.maintenance_message" "Great things are happening! MISP is undergoing maintenance, but will return shortly. You can contact the administration at \$email."
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.footermidleft" "This is an initial install"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.footermidright" "Please configure and harden accordingly"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.welcome_text_top" "Initial Install, please configure"
# TODO: Make sure $FLAVOUR is correct
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.welcome_text_bottom" "Welcome to MISP on ${FLAVOUR}, change this message in MISP Settings"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.attachments_dir" "${PATH_TO_MISP}/app/files"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.download_attachments_on_load" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_alert_metadata_only" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.title_text" "MISP"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.terms_download" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.showorgalternate" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "MISP.event_view_filter_fields" "id, uuid, value, comment, type, category, Tag.name"
# Force defaults to make MISP Server Settings less GREEN
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "debug" 0
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.auth_enforced" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.log_each_individual_auth_fail" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.rest_client_baseurl" ""
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.advanced_authkeys" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.password_policy_length" 12
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.password_policy_complexity" '/^((?=.*\d)|(?=.*\W+))(?![\n])(?=.*[A-Z])(?=.*[a-z]).*$|.{16,}/'
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.self_registration_message" "If you would like to send us a registration request, please fill out the form below. Make sure you fill out as much information as possible in order to ease the task of the administrators."
# Appease the security audit, #hardening
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.disable_browser_cache" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.check_sec_fetch_site_header" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.csp_enforce" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.advanced_authkeys" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.do_not_log_authkeys" true
# Appease the security audit, #loggin
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Security.username_in_response_header" true
# It is possible to updateMISP too, only here for reference how to to that on the CLI.
## ${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateMISP
# Set MISP Live
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Live ${MISP_LIVE}
}
# This updates Galaxies, ObjectTemplates, Warninglists, Noticelists, Templates
updateGOWNT () {
# AUTH_KEY Place holder in case we need to **curl** something in the future
#
${SUDO_WWW} ${RUN_MYSQL} -- mysql -h ${DBHOST} -u ${DBUSER_MISP} -p${DBPASSWORD_MISP} misp -e "SELECT authkey FROM users;" | tail -1 > /tmp/auth.key
AUTH_KEY=$(cat /tmp/auth.key)
rm /tmp/auth.key
debug "Updating Galaxies, ObjectTemplates, Warninglists, Noticelists and Templates"
# Update the galaxies…
# TODO: Fix updateGalaxies
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateGalaxies
# Updating the taxonomies…
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateTaxonomies
# Updating the warning lists…
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateWarningLists
# Updating the notice lists…
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateNoticeLists
# Updating the object templates…
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin updateObjectTemplates "1337"
}
# <snippet-end 2_core-cake.sh>
# <snippet-begin 3_misp-modules.sh>
# Main MISP Modules install function
mispmodules () {
cd /usr/local/src/
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
## TODO: checkUsrLocalSrc in main doc
if [[ ! -d /usr/local/src/misp-modules ]]; then
debug "Cloning misp-modules"
false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/MISP/misp-modules.git; done
else
false; while [[ $? -ne 0 ]]; do $SUDO_CMD git -C /usr/local/src/misp-modules pull; done
fi
# Install faup/gtcaca
[[ ! -d "faup" ]] && false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/stricaud/faup.git faup; done
[[ ! -d "gtcaca" ]] && false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${MISP_USER}:${MISP_USER} faup gtcaca
# Install gtcaca
cd gtcaca
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
cd /usr/local/src/faup
# Install faup
$SUDO_CMD mkdir -p build
cd build
$SUDO_CMD cmake .. && $SUDO_CMD make
sudo make install
sudo ldconfig
cd /usr/local/src/misp-modules
# some misp-modules dependencies
sudo apt install libpq5 libjpeg-dev tesseract-ocr libpoppler-cpp-dev imagemagick libopencv-dev zbar-tools libzbar0 libzbar-dev libfuzzy-dev -y
# If you build an egg, the user you build it as need write permissions in the CWD
sudo chgrp $WWW_USER .
sudo chmod og+w .
$SUDO_WWW ${PATH_TO_MISP}/venv/bin/pip install pillow
$SUDO_WWW ${PATH_TO_MISP}/venv/bin/pip install -I -r REQUIREMENTS
sudo chgrp staff .
$SUDO_WWW ${PATH_TO_MISP}/venv/bin/pip install -I .
$SUDO_WWW ${PATH_TO_MISP}/venv/bin/pip install censys pyfaup
# Start misp-modules as a service
sudo cp /usr/local/src/misp-modules/etc/systemd/system/misp-modules.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable --now misp-modules
# Sleep 9 seconds to give misp-modules a chance to spawn
sleep 9
}
# <snippet-end 3_misp-modules.sh>
# <snippet-begin 3_misp-modules-cake.sh>
modulesCAKE () {
# Enable Enrichment, set better timeouts
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_popover_only" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hover_timeout" 150
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_timeout" 300
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_bgpranking_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_countrycode_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cve_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cve_advanced_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_cpe_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_dns_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_eql_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_btc_steroids_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ipasn_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_reversedns_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_yara_syntax_validator_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_yara_query_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_wiki_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_threatminer_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_threatcrowd_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_hashdd_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_rbl_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_sigma_syntax_validator_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_stix2_pattern_syntax_validator_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_sigma_queries_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_dbl_spamhaus_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_btc_scam_check_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_macvendors_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_qrcode_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ocr_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_pdf_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_docx_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_xlsx_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_pptx_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_ods_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_odt_enrich_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_urlhaus_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_malwarebazaar_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_html_to_markdown_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_socialscan_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_url" "http://127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Enrichment_services_port" 6666
# Enable Import modules, set better timeout
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_url" "http://127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_services_port" 6666
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_timeout" 300
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_ocr_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_mispjson_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_openiocimport_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_threatanalyzer_import_enabled" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Import_csvimport_enabled" true
# Enable Export modules, set better timeout
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_url" "http://127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_services_port" 6666
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_timeout" 300
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.Export_pdfexport_enabled" true
}
# <snippet-end 3_misp-modules-cake.sh>
!!! warning
If you have installed the recommended Python 3 virtualenv to the recommended place of ${PATH_TO_MISP}/venv set the following MISP configurable
bash
sudo -H -u www-data $CAKE Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python"
or on Rocky Linux
bash
sudo -u apache $RUN_PHP "$CAKE Admin setSetting "MISP.python_bin" "${PATH_TO_MISP}/venv/bin/python""
!!! warning Make sure that the STIX libraries and GnuPG work as intended, if not, refer to the relevant sections in the install guide you are currently reading.
!!! notice
Now log in using the webinterface: http://misp/users/login
The default user/pass = admin@admin.test/admin
Using the server settings tool in the admin interface (Administration -> Server Settings), set MISP up to your preference.
It is especially vital that no critical issues remain!
Don’t forget to change the email, password and authentication key after installation.
Once done, have a look at the diagnostics.
!!! notice
If any of the directories that MISP uses to store files is not writeable to the apache user, change the permissions
you can do this by running the following commands:
bash
chmod -R 750 ${PATH_TO_MISP}/<directory path with an indicated issue>
# /!\ Depending on your OS replace www-data with apache or www or whatever user is the web server user.
chown -R www-data:www-data ${PATH_TO_MISP}/<directory path with an indicated issue>
!!! notice
If anything goes wrong, make sure that you check MISP’s logs for errors:
# ${PATH_TO_MISP}/app/tmp/logs/error.log
# ${PATH_TO_MISP}/app/tmp/logs/resque-worker-error.log
# ${PATH_TO_MISP}/app/tmp/logs/resque-scheduler-error.log
# ${PATH_TO_MISP}/app/tmp/logs/resque-2018-10-25.log //where the actual date is the current date
By default CakePHP exposes its name and version in email headers. Apply a patch to remove this behavior.
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install pyzmq
# <snippet-begin 4_kafka.sh>
installKafka () {
sudo apt-get install librdkafka-dev php-dev -y
sudo pecl channel-update pecl.php.net
sudo pecl install rdkafka
echo "extension=rdkafka.so" | sudo tee ${PHP_ETC_BASE}/mods-available/rdkafka.ini
sudo phpenmod rdkafka
sudo service apache2 restart
}
# <snippet-end 4_kafka.sh>
!!! warning A valid MaxMind DB key is required.
# <snippet-begin 4_misp-dashboard.sh>
# Main MISP Dashboard install function
mispDashboard () {
debug "Install misp-dashboard"
# Install pyzmq to main MISP venv
debug "Installing PyZMQ"
$SUDO_WWW ${PATH_TO_MISP}/venv/bin/pip install pyzmq
cd /var/www
sudo mkdir misp-dashboard
sudo chown $WWW_USER:$WWW_USER misp-dashboard
false; while [[ $? -ne 0 ]]; do $SUDO_WWW git clone https://github.com/MISP/misp-dashboard.git; done
cd misp-dashboard
sudo -H /var/www/misp-dashboard/install_dependencies.sh
sudo sed -i "s/^host\ =\ localhost/host\ =\ 0.0.0.0/g" /var/www/misp-dashboard/config/config.cfg
sudo sed -i '/Listen 80/a Listen 0.0.0.0:8001' /etc/apache2/ports.conf
sudo apt install libapache2-mod-wsgi-py3 net-tools -y
echo "<VirtualHost *:8001>
ServerAdmin admin@misp.local
ServerName misp.local
DocumentRoot /var/www/misp-dashboard
WSGIDaemonProcess misp-dashboard \
user=misp group=misp \
python-home=/var/www/misp-dashboard/DASHENV \
processes=1 \
threads=15 \
maximum-requests=5000 \
listen-backlog=100 \
queue-timeout=45 \
socket-timeout=60 \
connect-timeout=15 \
request-timeout=60 \
inactivity-timeout=0 \
deadlock-timeout=60 \
graceful-timeout=15 \
eviction-timeout=0 \
shutdown-timeout=5 \
send-buffer-size=0 \
receive-buffer-size=0 \
header-buffer-size=0 \
response-buffer-size=0 \
server-metrics=Off
WSGIScriptAlias / /var/www/misp-dashboard/misp-dashboard.wsgi
<Directory /var/www/misp-dashboard>
WSGIProcessGroup misp-dashboard
WSGIApplicationGroup %{GLOBAL}
Require all granted
</Directory>
LogLevel info
ErrorLog /var/log/apache2/misp-dashboard.local_error.log
CustomLog /var/log/apache2/misp-dashboard.local_access.log combined
ServerSignature Off
</VirtualHost>" | sudo tee /etc/apache2/sites-available/misp-dashboard.conf
# Enable misp-dashboard in apache and reload
sudo a2ensite misp-dashboard
sudo systemctl restart apache2
# Needs to be started after apache2 is reloaded so the port status check works
$SUDO_WWW bash /var/www/misp-dashboard/start_all.sh
# Add misp-dashboard to rc.local to start on boot.
sudo sed -i -e '$i \sudo -u www-data bash /var/www/misp-dashboard/start_all.sh > /tmp/misp-dashboard_rc.local.log\n' /etc/rc.local
}
# <snippet-end 4_misp-dashboard.sh>
```bash
# <snippet-begin 4_misp-dashboard-cake.sh>
dashboardCAKE () {
# Enable ZeroMQ for misp-dashboard
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_host" "127.0.0.1"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_port" 50000
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_host" "localhost"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_port" 6379
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_database" 1
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_redis_namespace" "mispq"
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_include_attachments" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_event_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_object_reference_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_attribute_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_tag_notifications_enable" false
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_sighting_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_user_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_organisation_notifications_enable" true
${SUDO_WWW} ${RUN_PHP} -- ${CAKE} Admin setSetting "Plugin.ZeroMQ_audit_notifications_enable" false
}
# <snippet-end 4_misp-dashboard-cake.sh>
# <snippet-begin 6_viper.sh>
# viper-web is broken ATM
# Main Viper install function
viper () {
export PATH=$PATH:/home/misp/.local/bin
debug "Installing Viper dependencies"
cd /usr/local/src/
sudo apt-get install \
libssl-dev swig python3-ssdeep p7zip-full unrar-free sqlite python3-pyclamd exiftool radare2 \
python3-magic python3-sqlalchemy python3-prettytable libffi-dev libfreetype6-dev libpng-dev -qy
if [[ -f "/etc/debian_version" ]]; then
if [[ "$(cat /etc/debian_version)" == "9.9" ]]; then
sudo apt-get install libpython3.5-dev -qy
fi
fi
echo "Cloning Viper"
false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/viper-framework/viper.git; done
false; while [[ $? -ne 0 ]]; do $SUDO_CMD git clone https://github.com/viper-framework/viper-web.git; done
sudo chown -R $MISP_USER:$MISP_USER viper
sudo chown -R $MISP_USER:$MISP_USER viper-web
cd viper
echo "Creating virtualenv"
$SUDO_CMD virtualenv -p python3 venv
echo "Submodule update"
# TODO: Check for current user install permissions
$SUDO_CMD git submodule update --init --recursive
echo "pip install deps"
$SUDO_CMD ./venv/bin/pip install pefile olefile jbxapi Crypto pypdns pypssl r2pipe pdftools virustotal-api SQLAlchemy PrettyTable python-magic scrapy lief
$SUDO_CMD ./venv/bin/pip install .
echo 'update-modules' |/usr/local/src/viper/venv/bin/viper
cd /usr/local/src/viper-web
$SUDO_CMD sed -i '1 s/^.*$/\#!\/usr\/local\/src\/viper\/venv\/bin\/python/' viper-web
$SUDO_CMD /usr/local/src/viper/venv/bin/pip install -r requirements.txt
echo "Launching viper-web"
$SUDO_CMD /usr/local/src/viper-web/viper-web -p 8888 -H 0.0.0.0 &
echo 'PATH="/home/misp/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/local/src/viper:/var/www/MISP/app/Console"' |sudo tee -a /etc/environment
echo ". /etc/environment" >> /home/${MISP_USER}/.profile
# TODO: Perms, MISP_USER_HOME, nasty hack cuz Kali on R00t
if [ -f /home/${MISP_USER}/.viper/viper.conf ]; then
VIPER_HOME="/home/${MISP_USER}/.viper"
else
VIPER_HOME="${HOME}/.viper"
fi
echo "Setting misp_url/misp_key"
$SUDO_CMD sed -i "s/^misp_url\ =/misp_url\ =\ http:\/\/localhost/g" ${VIPER_HOME}/viper.conf
$SUDO_CMD sed -i "s/^misp_key\ =/misp_key\ =\ $AUTH_KEY/g" ${VIPER_HOME}/viper.conf
# Reset admin password to: admin/Password1234
echo "Fixing admin.db with default password"
VIPER_COUNT=0
while [ "$(sudo sqlite3 ${VIPER_HOME}/admin.db 'UPDATE auth_user SET password="pbkdf2_sha256$100000$iXgEJh8hz7Cf$vfdDAwLX8tko1t0M1TLTtGlxERkNnltUnMhbv56wK/U="'; echo $?)" -ne "0" ]; do
# FIXME This might lead to a race condition, the while loop is sub-par
sudo chown $MISP_USER:$MISP_USER ${VIPER_HOME}/admin.db
echo "Updating viper-web admin password, giving process time to start-up, sleeping 5, 4, 3,…"
sleep 6
VIPER_COUNT=$[$VIPER_COUNT+1]
if [[ "$VIPER_COUNT" > '10' ]]; then
echo "Something is wrong with updating viper. Continuing without db update."
break
fi
done
# Add viper-web to rc.local to be started on boot
sudo sed -i -e '$i \sudo -u misp /usr/local/src/viper/viper-web -p 8888 -H 0.0.0.0 > /tmp/viper-web_rc.local.log &\n' /etc/rc.local
}
# <snippet-end 6_viper.sh>
# <snippet-begin 6_ssdeep.sh>
ssdeep () {
debug "Install ssdeep 2.14.1"
cd /usr/local/src
$SUDO_CMD wget https://github.com/ssdeep-project/ssdeep/releases/download/release-2.14.1/ssdeep-2.14.1.tar.gz
$SUDO_CMD tar zxvf ssdeep-2.14.1.tar.gz
cd ssdeep-2.14.1
$SUDO_CMD ./configure --datadir=/usr --prefix=/usr --localstatedir=/var --sysconfdir=/etc
$SUDO_CMD make
sudo make install
#installing ssdeep_php
sudo pecl channel-update pecl.php.net
sudo pecl install ssdeep
# You should add "extension=ssdeep.so" to mods-available - Check /etc/php for your current version
echo "extension=ssdeep.so" | sudo tee ${PHP_ETC_BASE}/mods-available/ssdeep.ini
sudo phpenmod ssdeep
sudo service apache2 restart
}
# <snippet-end 6_ssdeep.sh>
# <snippet-begin 5_mail_to_misp.sh>
# Main mail2misp install function
mail2misp () {
debug "Installing Mail2${LBLUE}MISP${NC}"
cd /usr/local/src/
sudo apt-get install cmake libcaca-dev liblua5.3-dev -y
false; while [[ $? -ne 0 ]]; do ${SUDO_CMD} git clone https://github.com/MISP/mail_to_misp.git; done
## TODO: The below fails miserably (obviously) if faup/gtcac dirs exist, let's just make the dangerous assumption (for the sake of the installer, that they exist)
##[[ ! -d "faup" ]] && false; while [[ $? -ne 0 ]]; do ${SUDO_CMD} git clone https://github.com/stricaud/faup.git faup; done
##[[ ! -d "gtcaca" ]] && false; while [[ $? -ne 0 ]]; do ${SUDO_CMD} git clone https://github.com/stricaud/gtcaca.git gtcaca; done
sudo chown -R ${MISP_USER}:${MISP_USER} faup mail_to_misp gtcaca
cd gtcaca
${SUDO_CMD} mkdir -p build
cd build
${SUDO_CMD} cmake .. && ${SUDO_CMD} make
sudo make install
cd ../../faup
${SUDO_CMD} mkdir -p build
cd build
${SUDO_CMD} cmake .. && ${SUDO_CMD} make
sudo make install
sudo ldconfig
cd ../../mail_to_misp
${SUDO_CMD} virtualenv -p python3 venv
${SUDO_CMD} ./venv/bin/pip install -r requirements.txt
${SUDO_CMD} cp mail_to_misp_config.py-example mail_to_misp_config.py
##$SUDO cp mail_to_misp_config.py-example mail_to_misp_config.py
${SUDO_CMD} sed -i "s/^misp_url\ =\ 'YOUR_MISP_URL'/misp_url\ =\ 'https:\/\/localhost'/g" /usr/local/src/mail_to_misp/mail_to_misp_config.py
${SUDO_CMD} sed -i "s/^misp_key\ =\ 'YOUR_KEY_HERE'/misp_key\ =\ '${AUTH_KEY}'/g" /usr/local/src/mail_to_misp/mail_to_misp_config.py
}
# <snippet-end 5_mail_to_misp.sh>
MISP is a web-based information sharing platform, by design it is kept rather simple and hardening can be done by following the common best practices.
Bare in mind that neither the MISP documentation efforts or the core MISP project can give you the ultimate guide on how to harden your system. This is not the purpose of the MISP Project but the purpose and care of those individuals and organizations deploying MISP Instances.
Nevertheless here is a very rough food for thoughts bulletpoint list for you to consider, and a list of some hardening resources below.
To make Apache less verbose in terms of sending banners, the belo might help.
diff --git a/apache2/conf-available/security.conf b/apache2/conf-available/security.conf
index f9f69d4..2e8fd78 100644
--- a/apache2/conf-available/security.conf
+++ b/apache2/conf-available/security.conf
@@ -22,7 +22,7 @@
# Set to one of: Full | OS | Minimal | Minor | Major | Prod
# where Full conveys the most information, and Prod the least.
#ServerTokens Minimal
-ServerTokens OS
+ServerTokens Prod
#ServerTokens Full
#
@@ -33,7 +33,7 @@ ServerTokens OS
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#ServerSignature Off
-ServerSignature On
+ServerSignature Off
#
# Allow TRACE method
IT Security Guidelines for TLS by NCSC.nl
Weak Diffie-Hellman and the Logjam Attack
!!! notice The following section is an administrative section that is used by the “INSTALL.sh” script. Please ignore.
# <snippet-begin 0_support-functions.sh>
# Leave empty for NO debug messages, if run with set -x or bash -x it will enable DEBUG by default
DEBUG=
case "$-" in
*x*) NO_PROGRESS=1; DEBUG=1 ;;
*) NO_PROGRESS=0 ;;
esac
## Function Section ##
## Usage of this script
usage () {
if [ "$0" == "bash" ]; then
WEB_INSTALL=1
SCRIPT_NAME="Web Installer Command"
else
SCRIPT_NAME=$0
fi
exec &> /dev/tty
space
echo -e "Please specify what type of ${LBLUE}MISP${NC} setup you want to install."
space
echo -e "${SCRIPT_NAME} -c | Install ONLY ${LBLUE}MISP${NC} Core" # core
echo -e " -M | ${LBLUE}MISP${NC} modules" # modules
## FIXME: The current state of misp-dashboard is broken, disabling any use.
##echo -e " -D | ${LBLUE}MISP${NC} dashboard" # dashboard
## FIXME: The current state of Viper is broken, disabling any use.
##echo -e " -V | Viper" # viper
echo -e " -m | Mail 2 ${LBLUE}MISP${NC}" # mail2
echo -e " -S | Experimental ssdeep correlations" # ssdeep
echo -e " -A | Install ${YELLOW}all${NC} of the above" # all
space
echo -e " -C | Only do ${YELLOW}pre-install checks and exit${NC}" # pre
space
echo -e " -u | Do an unattended Install, no questions asked" # UNATTENDED
echo -e "${HIDDEN} -U | Attempt and upgrade of selected item${NC}" # UPGRADE
echo -e "${HIDDEN} -N | Nuke this MISP Instance${NC}" # NUKE
echo -e "${HIDDEN} -f | Force test install on current Ubuntu LTS schim, add -B for 18.04 -> 18.10, or -BB 18.10 -> 19.10)${NC}" # FORCE
echo -e "Options can be combined: ${SCRIPT_NAME} -c -D # Will install Core+Dashboard"
space
echo -e "Recommended is either a barebone MISP install (ideal for syncing from other instances) or"
echo -e "MISP + modules - ${SCRIPT_NAME} -c -M"
echo -e ""
echo -e ""
echo -e "Interesting environment variables that get considered are:"
echo -e ""
echo -e "MISP_USER/MISP_PASSWORD # Local username on machine, default: misp/opensslGeneratedPassword"
echo -e ""
echo -e "PATH_TO_MISP # Where MISP will be installed, default: /var/www/MISP (recommended)"
echo -e ""
echo -e "DBHOST/DBNAME # database hostname, MISP database name, default: localhost/misp"
echo -e "DBUSER_ADMIN/DBPASSWORD_ADMIN # MySQL admin user, default: root/opensslGeneratedPassword"
echo -e "DBUSER_MISP/DBPASSWORD_MISP # MISP database user, default: misp/opensslGeneratedPassword"
echo -e ""
echo -e "You need to export the variable(s) to be taken into account. (or specified in-line when invoking INSTALL.sh)"
space
}
# Check if element is contained in array
containsElement () {
local e match="$1"
shift
for e; do [[ "$e" == "$match" ]] && return 0; done
return 1
}
checkOpt () {
# checkOpt feature
containsElement $1 "${options[@]}"
}
setOpt () {
options=()
for o in $@; do
case "$o" in
("-c") echo "core"; CORE=1 ;;
("-V") echo "viper"; VIPER=1 ;;
("-M") echo "modules"; MODULES=1 ;;
("-D") echo "dashboard"; DASHBOARD=1 ;;
("-m") echo "mail2"; MAIL2=1 ;;
("-S") echo "ssdeep"; SSDEEP=1 ;;
("-A") echo "all"; ALL=1 ;;
("-C") echo "pre"; PRE=1 ;;
("-U") echo "upgrade"; UPGRADE=1 ;;
("-N") echo "nuke"; NUKE=1 ;;
("-u") echo "unattended"; UNATTENDED=1 ;;
("-ni") echo "noninteractive"; NONINTERACTIVE=1 ;;
("-f") echo "force"; FORCE=1 ;;
(*) echo "$o is not a valid argument"; exit 1 ;;
esac
done
}
# check if command_exists
command_exists () {
command -v "$@" > /dev/null 2>&1
}
# TODO: fix os detection mess
# Try to detect what we are running on
checkCoreOS () {
# lsb_release can exist on any platform. RedHat package: redhat-lsb
LSB_RELEASE=$(which lsb_release > /dev/null ; echo $?)
APT=$(which apt > /dev/null 2>&1; echo -n $?)
APT_GET=$(which apt-get > /dev/null 2>&1; echo $?)
# debian specific
# /etc/debian_version
## os-release #generic
# /etc/os-release
# Redhat checks
if [[ -f "/etc/redhat-release" ]]; then
echo "This is some redhat flavour"
REDHAT=1
RHfla=$(cat /etc/redhat-release | cut -f 1 -d\ | tr '[:upper:]' '[:lower:]')
fi
}
# Extract debian flavour
checkFlavour () {
FLAVOUR=""
# Every system that we officially support has /etc/os-release
if [ -r /etc/os-release ]; then
FLAVOUR="$(. /etc/os-release && echo "$ID"| tr '[:upper:]' '[:lower:]')"
fi
case "${FLAVOUR}" in
ubuntu)
if command_exists lsb_release; then
dist_version="$(lsb_release --codename | cut -f2)"
fi
if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
fi
;;
debian|raspbian)
dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
case "$dist_version" in
10)
dist_version="buster"
;;
9)
dist_version="stretch"
;;
esac
;;
centos)
if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
dist_version=${dist_version:0:1}
fi
echo "${FLAVOUR} support is experimental at the moment"
;;
rhel|ol|sles|fedora)
if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
# FIXME: On fedora the trimming fails
dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
dist_version=${dist_version:0:1} # Only interested about major version
fi
# FIXME: Only tested for RHEL 7 so far
echo "${FLAVOUR} support is experimental at the moment"
;;
*)
if command_exists lsb_release; then
dist_version="$(lsb_release --release | cut -f2)"
fi
if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
fi
;;
esac
# FIXME: The below want to be refactored
if [ "${FLAVOUR}" == "ubuntu" ]; then
RELEASE=$(lsb_release -s -r)
debug "We detected the following Linux flavour: ${YELLOW}$(tr '[:lower:]' '[:upper:]' <<< ${FLAVOUR:0:1})${FLAVOUR:1} ${RELEASE}${NC}"
else
debug "We detected the following Linux flavour: ${YELLOW}$(tr '[:lower:]' '[:upper:]' <<< ${FLAVOUR:0:1})${FLAVOUR:1}${NC}"
fi
}
# Check if this is a forked Linux distro
check_forked () {
# Check for lsb_release command existence, it usually exists in forked distros
if command_exists lsb_release; then
# Check if the `-u` option is supported
set +e
lsb_release -a -u > /dev/null 2>&1
lsb_release_exit_code=$?
set -e
# Check if the command has exited successfully, it means we're in a forked distro
if [ "$lsb_release_exit_code" = "0" ]; then
# Print info about current distro
cat <<-EOF
You're using '${FLAVOUR}' version '${dist_version}'.
EOF
# Get the upstream release info
FLAVOUR=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]')
dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]')
# Print info about upstream distro
cat <<-EOF
Upstream release is '${FLAVOUR}' version '$dist_version'.
EOF
else
if [[ -r /etc/debian_version ]] && [[ "${FLAVOUR}" != "ubuntu" ]] && [[ "${FLAVOUR}" != "raspbian" ]]; then
# We're Debian and don't even know it!
FLAVOUR=debian
dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
case "$dist_version" in
10)
dist_version="buster"
;;
9)
dist_version="stretch"
;;
8|'Kali Linux 2')
dist_version="jessie"
;;
esac
fi
fi
fi
}
checkInstaller () {
# Workaround: shasum is not available on RHEL, only checking sha512
if [[ "${FLAVOUR}" == "rhel" ]] || [[ "${FLAVOUR}" == "centos" ]] || [[ "${FLAVOUR}" == "fedora" ]]; then
INSTsum=$(sha512sum ${0} | cut -f1 -d\ )
/usr/bin/wget --no-cache -q -O /tmp/INSTALL.sh.sha512 https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh.sha512
chsum=$(cat /tmp/INSTALL.sh.sha512)
if [[ "${chsum}" == "${INSTsum}" ]]; then
echo "SHA512 matches"
else
echo "SHA512: ${chsum} does not match the installer sum of: ${INSTsum}"
# exit 1 # uncomment when/if PR is merged
fi
else
# TODO: Implement $FLAVOUR checks and install depending on the platform we are on
if [[ $(which shasum > /dev/null 2>&1 ; echo $?) -ne 0 ]]; then
checkAptLock
sudo apt install libdigest-sha-perl -qyy
fi
# SHAsums to be computed, not the -- notatiation is for ease of use with rhash
SHA_SUMS="--sha1 --sha256 --sha384 --sha512"
for sum in $(echo ${SHA_SUMS} |sed 's/--sha//g'); do
/usr/bin/wget --no-cache -q -O /tmp/INSTALL.sh.sha${sum} https://raw.githubusercontent.com/MISP/MISP/2.4/INSTALL/INSTALL.sh.sha${sum}
INSTsum=$(shasum -a ${sum} ${0} | cut -f1 -d\ )
chsum=$(cat /tmp/INSTALL.sh.sha${sum} | cut -f1 -d\ )
if [[ "${chsum}" == "${INSTsum}" ]]; then
echo "sha${sum} matches"
else
echo "sha${sum}: ${chsum} does not match the installer sum of: ${INSTsum}"
echo "Delete installer, re-download and please run again."
exit 1
fi
done
fi
}
# Extract manufacturer
checkManufacturer () {
if [[ -z $(which dmidecode) ]]; then
checkAptLock
sudo apt install dmidecode -qy
fi
MANUFACTURER=$(sudo dmidecode -s system-manufacturer)
debug ${MANUFACTURER}
}
# Dynamic horizontal spacer if needed, for autonomeous an no progress bar install, we are static.
space () {
if [[ "$NO_PROGRESS" == "1" ]] || [[ "$PACKER" == "1" ]]; then
echo "--------------------------------------------------------------------------------"
return
fi
# Check terminal width
num=`tput cols`
for i in `seq 1 $num`; do
echo -n "-"
done
echo ""
}
# Spinner so the user knows something is happening
spin()
{
if [[ "$NO_PROGRESS" == "1" ]]; then
return
fi
spinner="/|\\-/|\\-"
while :
do
for i in `seq 0 7`
do
echo -n "${spinner:$i:1}"
echo -en "\010"
sleep 0.$i
done
done
}
# Progress bar
progress () {
progress=$[$progress+$1]
if [[ "$NO_PROGRESS" == "1" ]] || [[ "$PACKER" == "1" ]]; then
echo "progress=${progress}" > /tmp/INSTALL.stat
return
fi
bar="#"
# Prevent progress of overflowing
if [[ $progress -ge 100 ]]; then
echo -ne "##################################################################################################### (100%)\r"
return
fi
# Display progress
for p in $(seq 1 $progress); do
bar+="#"
echo -ne "$bar ($p%)\r"
done
echo -ne '\n'
echo "progress=${progress}" > /tmp/INSTALL.stat
}
# Check locale
checkLocale () {
debug "Checking Locale"
# If locale is missing, generate and install a common UTF-8
if [[ ! -f /etc/default/locale || $(wc -l /etc/default/locale| cut -f 1 -d\ ) -eq "1" ]]; then
checkAptLock
sudo DEBIAN_FRONTEND=noninteractive apt install locales -qy
sudo sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/g' /etc/locale.gen
sudo locale-gen en_US.UTF-8
sudo update-locale LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8
fi
}
# Simple function to check command exit code
checkFail () {
# '-ne' checks for numerical differences, '==' used for strings
if [[ $2 -ne 0 ]]; then
echo "iAmError: $1"
echo "The last command exited with error code: $2"
exit $2
fi
}
ask_o () {
ANSWER=""
if [ -z "${1}" ]; then
echo "This function needs at least 1 parameter."
exit 1
fi
[ -z "${2}" ] && OPT1="y" || OPT1="${2}"
[ -z "${3}" ] && OPT2="n" || OPT2="${3}"
while true; do
case "${ANSWER}" in "${OPT1}" | "${OPT2}") break ;; esac
echo -e -n "${1} (${OPT1}/${OPT2}) "
read ANSWER
ANSWER=$(echo "${ANSWER}" | tr '[:upper:]' '[:lower:]')
done
}
clean () {
rm /tmp/INSTALL.stat
rm /tmp/INSTALL.sh.*
}
# Check if misp user is present and if run as root
checkID () {
debug "Checking if run as root and $MISP_USER is present"
if [[ $EUID -eq 0 ]]; then
echo "This script cannot be run as a root"
clean > /dev/null 2>&1
exit 1
elif [[ $(id $MISP_USER >/dev/null; echo $?) -ne 0 ]]; then
if [[ "$UNATTENDED" != "1" ]]; then
echo "There is NO user called '$MISP_USER' create a user '$MISP_USER' (y) or continue as $USER (n)? (y/n) "
read ANSWER
ANSWER=$(echo $ANSWER |tr '[:upper:]' '[:lower:]')
INSTALL_USER=${USER}
else
ANSWER="y"
fi
if [[ $ANSWER == "y" ]]; then
sudo useradd -s /bin/bash -m -G adm,cdrom,sudo,dip,plugdev,www-data,staff $MISP_USER
echo $MISP_USER:$MISP_PASSWORD | sudo chpasswd
echo "User $MISP_USER added, password is: $MISP_PASSWORD"
elif [[ $ANSWER == "n" ]]; then
echo "Using $USER as install user, hope that is what you want."
echo -e "${RED}Adding $USER to groups $WWW_USER and staff${NC}"
MISP_USER=$USER
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
else
echo "yes or no was asked, try again."
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
exit 1
fi
else
echo "User ${MISP_USER} exists, skipping creation"
echo -e "${RED}Adding $MISP_USER to groups $WWW_USER and staff${NC}"
sudo adduser $MISP_USER staff
sudo adduser $MISP_USER $WWW_USER
fi
# FIXME: the below SUDO_CMD check is a duplicate from global variables, try to have just one check
# sudo config to run $LUSER commands
if [[ "$(groups ${MISP_USER} |grep -o 'staff')" == "staff" ]]; then
SUDO_CMD="sudo -H -u ${MISP_USER} -g staff"
else
SUDO_CMD="sudo -H -u ${MISP_USER}"
fi
}
# pre-install check to make sure what we will be installing on, is ready and not a half installed system
preInstall () {
# preInstall needs to be able to be called before ANY action. Install/Upgrade/AddTool
# Pre install wants to be the place too where the following is checked and set via ENV_VAR:
# Check if composer is installed and functioning
# Check if misp db is installed (API call would confirm that the DB indeed works)
# Check apache config (Maybe try to talk to the server via api, this would confirm quite a lot)
# Check if workers are running/installed, maybe kick them if they are not
# /var/www/MISP/app/Config/[bootstrap,databases,core,config].php exists
# /var/www/MISP perms are correct (for $SUDO_WWW usage)
#
# Check if $PATH_TO_MISP exists and is writable by $WWW_USER
[[ -d "$PATH_TO_MISP" ]] && PATH_TO_MISP_EXISTS=1 && echo "$PATH_TO_MISP exists"
# .git exists and git is working for $WWW_USER
[[ -d "$PATH_TO_MISP/.git" ]] && PATH_TO_GIT_EXISTS=1 && echo "$PATH_TO_MISP/.git exists" && cd $PATH_TO_MISP && $SUDO_WWW git status
# .gnupg exists and working correctly
[[ -d "$PATH_TO_MISP/.gnupg" ]] && PATH_TO_GNUPG_EXISTS=1 && echo "$PATH_TO_MISP/.gnupg exists"
# Extract username, password and dbname
##cat database.php |grep -v // |grep -e database -e login -e password |tr -d \' |tr -d \ |tr -d , |tr -d \>
DBPASSWORD_MISP=$(cat database.php |grep -v // |grep -e password |tr -d \' |tr -d \ |tr -d , |tr -d \> |cut -f 2 -d=)
DBUSER_MISP=$(cat database.php |grep -v // |grep -e login |tr -d \' |tr -d \ |tr -d , |tr -d \> |cut -f 2 -d=)
DBNAME=$(cat database.php |grep -v // |grep -e database |tr -d \' |tr -d \ |tr -d , |tr -d \> |cut -f 2 -d=)
AUTH_KEY=$(mysql -h $DBHOST --disable-column-names -B -u $DBUSER_MISP -p"$DBPASSWORD_MISP" $DBNAME -e 'SELECT authkey FROM users WHERE role_id=1 LIMIT 1')
# Check if db exists
[[ -d "/var/lib/mysql/$DBNAME" ]] && MISP_DB_DIR_EXISTS=1 && echo "/var/lib/mysql/$DBNAME exists"
echo -e "${RED}Place-holder, not implemented yet.${NC}"
exit
}
# Upgrade function
upgrade () {
headerJSON="application/json"
Acc="Accept:"
Autho="Authorization:"
CT="Content-Type:"
MISP_BASEURL="https://127.0.0.1"
${SUDO_WWW} sh -c "cd ${PATH_TO_MISP}/app ; php composer.phar update ; php composer.phar self-update"
for URN in $(echo "galaxies warninglists noticelists objectTemplates taxonomies"); do
curl --header "$Autho $AUTH_KEY" --header "$Acc $headerJSON" --header "$CT $headerJSON" -k -X POST $MISP_BASEURL/$URN/update
done
echo -e "${RED}Place-holder, not implemented yet.${NC}"
exit
}
# check is /usr/local/src is RW by misp user
checkUsrLocalSrc () {
echo ""
if [[ -e /usr/local/src ]]; then
WRITEABLE=$(sudo -H -u $MISP_USER touch /usr/local/src 2> /dev/null ; echo $?)
if [[ "$WRITEABLE" == "0" ]]; then
echo "Good, /usr/local/src exists and is writeable as $MISP_USER"
else
# TODO: The below might be shorter, more elegant and more modern
#[[ -n $KALI ]] || [[ -n $UNATTENDED ]] && echo "Just do it"
sudo chmod 2775 /usr/local/src
sudo chown root:staff /usr/local/src
fi
else
echo "/usr/local/src does not exist, creating."
mkdir -p /usr/local/src
sudo chmod 2775 /usr/local/src
# TODO: Better handling /usr/local/src permissions
if [[ "$(cat /etc/group |grep staff > /dev/null 2>&1)" == "0" ]]; then
sudo chown root:staff /usr/local/src
fi
fi
}
kaliSpaceSaver () {
# Future function in case Kali overlay on LiveCD is full
echo "${RED}Not implement${NC}"
}
# FIXME: Kali now uses kali/kali instead of root/toor
# Because Kali is l33t we make sure we DO NOT run as root
kaliOnTheR0ckz () {
totalRoot=$(df -k | grep /$ |awk '{ print $2 }')
totalMem=$(cat /proc/meminfo|grep MemTotal |grep -Eo '[0-9]{1,}')
overlay=$(df -kh |grep overlay; echo $?) # if 1 overlay NOT present
if [[ ${totalRoot} -lt 3059034 ]]; then
echo "(If?) You run Kali in LiveCD mode, you need more overlay disk space."
echo "This is defined by the total memory setting in you VM config."
echo "You currently have: ${totalMem}kB which is not enough."
echo "6-8Gb should be fine. (need >3Gb overlayFS)"
exit 1
fi
if [[ ${EUID} -eq 0 ]]; then
echo "This script must NOT be run as root"
exit 1
elif [[ $(id ${MISP_USER} >/dev/null; echo $?) -ne 0 ]]; then
sudo useradd -s /bin/bash -m -G adm,cdrom,sudo,dip,plugdev,www-data,staff ${MISP_USER}
echo ${MISP_USER}:${MISP_PASSWORD} | sudo chpasswd
else
# TODO: Make sure we consider this further down the road
echo "User ${MISP_USER} exists, skipping creation"
fi
}
setBaseURL () {
debug "Setting Base URL"
CONN=$(ip -br -o -4 a |grep UP |head -1 |tr -d "UP")
IFACE=$(echo $CONN |awk {'print $1'})
IP=$(echo $CONN |awk {'print $2'}| cut -f1 -d/)
[[ -n ${MANUFACTURER} ]] || checkManufacturer
if [[ "${MANUFACTURER}" != "innotek GmbH" ]] && [[ "$MANUFACTURER" != "VMware, Inc." ]] && [[ "$MANUFACTURER" != "QEMU" ]]; then
debug "We guess that this is a physical machine and cannot reliably guess what the MISP_BASEURL might be."
if [[ "${UNATTENDED}" != "1" ]]; then
echo "You can now enter your own MISP_BASEURL, if you wish to NOT do that, the MISP_BASEURL will be empty, which will work, but ideally you configure it afterwards."
echo "Do you want to change it now? (y/n) "
read ANSWER
ANSWER=$(echo ${ANSWER} |tr '[:upper:]' '[:lower:]')
if [[ "${ANSWER}" == "y" ]]; then
if [[ ! -z ${IP} ]]; then
echo "It seems you have an interface called ${IFACE} UP with the following IP: ${IP} - FYI"
echo "Thus your Base URL could be: https://${IP}"
fi
echo "Please enter the Base URL, e.g: 'https://example.org'"
echo ""
echo -n "Enter Base URL: "
read MISP_BASEURL
else
MISP_BASEURL='""'
fi
else
MISP_BASEURL="https://misp.local"
# Webserver configuration
FQDN='misp.local'
fi
elif [[ "${KALI}" == "1" ]]; then
MISP_BASEURL="https://misp.local"
# Webserver configuration
FQDN='misp.local'
elif [[ "${MANUFACTURER}" == "innotek GmbH" ]]; then
MISP_BASEURL='https://localhost:8443'
IP=$(ip addr show | awk '$1 == "inet" {gsub(/\/.*$/, "", $2); print $2}' |grep -v "127.0.0.1" |tail -1)
sudo iptables -t nat -A OUTPUT -p tcp --dport 8443 -j DNAT --to ${IP}:443
# Webserver configuration
FQDN='localhost.localdomain'
elif [[ "${MANUFACTURER}" == "VMware, Inc." ]]; then
MISP_BASEURL='""'
# Webserver configuration
FQDN='misp.local'
else
MISP_BASEURL='""'
# Webserver configuration
FQDN='misp.local'
fi
}
# Test and install software RNG
installRNG () {
sudo modprobe tpm-rng 2> /dev/null
if [ "$?" -eq "0" ]; then
echo tpm-rng | sudo tee -a /etc/modules
fi
checkAptLock
sudo apt install -qy rng-tools # This might fail on TPM grounds, enable the security chip in your BIOS
sudo service rng-tools start
if [ "$?" -eq "1" ]; then
sudo apt purge -qy rng-tools
sudo apt install -qy haveged
sudo /etc/init.d/haveged start
fi
}
# Kali upgrade
kaliUpgrade () {
debug "Running various Kali upgrade tasks"
checkAptLock
# Fix Missing keys early
sudo wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg
# /!\ The following is a very ugly dependency hack to make php7.4 work on Kali
wget http://archive.ubuntu.com/ubuntu/pool/main/o/openssl/libssl1.1_1.1.1f-1ubuntu2_amd64.deb
sudo dpkg -i libssl1.1_1.1.1f-1ubuntu2_amd64.deb
wget http://ftp.debian.org/debian/pool/main/i/icu/libicu67_67.1-7_amd64.deb
sudo dpkg -i libicu67_67.1-7_amd64.deb
# EOH End-Of-Hack
sudo DEBIAN_FRONTEND=noninteractive apt update
sudo DEBIAN_FRONTEND=noninteractive apt install --only-upgrade bash libc6 -y
sudo DEBIAN_FRONTEND=noninteractive apt autoremove -y
}
# Kali 2022.x has only php81
installDepsKaliPhp74 () {
sudo apt -y install lsb-release apt-transport-https ca-certificates
sudo wget -O /etc/apt/trusted.gpg.d/php.gpg https://packages.sury.org/php/apt.gpg
echo "deb https://packages.sury.org/php/ bullseye main" | sudo tee /etc/apt/sources.list.d/php.list
sudo apt update
wget http://ftp.us.debian.org/debian/pool/main/libf/libffi/libffi7_3.3-6_amd64.deb
sudo dpkg -i libffi7_3.3-6_amd64.deb
}
# Disables sleep
disableSleep () {
debug "Disabling sleep etc if run from a Laptop as the install might take some time…" > /dev/tty
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 2> /dev/null
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 2> /dev/null
gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type nothing 2> /dev/null
gsettings set org.gnome.desktop.screensaver lock-enabled false 2> /dev/null
gsettings set org.gnome.desktop.screensaver idle-activation-enabled false 2> /dev/null
setterm -blank 0 -powersave off -powerdown 0
xset s 0 0 2> /dev/null
xset dpms 0 0 2> /dev/null
xset dpms force off
xset s off 2> /dev/null
service sleepd stop
kill $(lsof | grep 'sleepd' | awk '{print $2}')
checkAptLock
}
# Remove alias if present
if [[ $(type -t checkAptLock) == "alias" ]]; then unalias checkAptLock; fi
# Simple function to make sure APT is not locked
checkAptLock () {
SLEEP=3
if [[ -n ${APT_UPDATED} ]]; then
sudo apt update && APT_UPDATED=1
fi
while [ "$DONE" != "0" ]; do
sudo apt-get check 2> /dev/null > /dev/null && DONE=0
echo -e "${LBLUE}apt${NC} is maybe ${RED}locked${NC}, waiting ${RED}$SLEEP${NC} seconds." > /dev/tty
sleep $SLEEP
SLEEP=$[$SLEEP+3]
done
unset DONE
}
# <snippet-begin 0_installDepsPhp70.sh>
# Install Php 7.0 dependencies
installDepsPhp70 () {
debug "Installing PHP 7.0 dependencies"
PHP_ETC_BASE=/etc/php/7.0
PHP_INI=${PHP_ETC_BASE}/apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i "s/^\($key\).*/\1 = $(eval echo \${$key})/" $PHP_INI
done
sudo sed -i "s/^\(session.sid_length\).*/\1 = $(eval echo \${session0sid_length})/" $PHP_INI
sudo sed -i "s/^\(session.use_strict_mode\).*/\1 = $(eval echo \${session0use_strict_mode})/" $PHP_INI
}
# <snippet-end 0_installDepsPhp70.sh>
# <snippet-begin 0_installDepsPhp73.sh>
# Install Php 7.3 deps
installDepsPhp73 () {
debug "Installing PHP 7.3 dependencies"
PHP_ETC_BASE=/etc/php/7.3
PHP_INI=${PHP_ETC_BASE}/apache2/php.ini
checkAptLock
if [[ ! -n ${KALI} ]]; then
sudo apt install -qy \
libapache2-mod-php7.3 \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php-redis php-gnupg \
php-gd
else
sudo apt install -qy \
libapache2-mod-php7.3 \
libgpgme-dev \
php7.3 php7.3-cli \
php7.3-dev \
php7.3-json php7.3-xml php7.3-mysql php7.3-opcache php7.3-readline php7.3-mbstring \
php7.3-gd
sudo pecl channel-update pecl.php.net
#sudo pear config-set php_ini ${PHP_INI}
echo "" |sudo pecl install redis
sudo pecl install gnupg
echo extension=gnupg.so | sudo tee ${PHP_ETC_BASE}/mods-available/gnupg.ini
echo extension=redis.so | sudo tee ${PHP_ETC_BASE}/mods-available/redis.ini
fi
}
# <snippet-end 0_installDepsPhp73.sh>
# Installing core dependencies
installDeps () {
debug "Installing core dependencies"
checkAptLock
sudo apt install -qy etckeeper
# Skip dist-upgrade for now, pulls in 500+ updated packages
#sudo apt -y dist-upgrade
gitMail=$(git config --global --get user.email ; echo $?)
if [ "$?" -eq "1" ]; then
git config --global user.email "root@kali.lan"
fi
gitUser=$(git config --global --get user.name ; echo $?)
if [ "$?" -eq "1" ]; then
git config --global user.name "Root User"
fi
[[ -n $KALI ]] || [[ -n $UNATTENDED ]] && sudo DEBIAN_FRONTEND=noninteractive apt install -qy postfix || sudo apt install -qy postfix
sudo apt install -qy \
curl gcc git gnupg-agent make openssl redis-server neovim unzip zip libyara-dev python3-yara python3-redis python3-zmq sqlite3 python3-virtualenv \
mariadb-client \
mariadb-server \
apache2 apache2-doc apache2-utils \
python3-dev python3-pip libpq5 libjpeg-dev libfuzzy-dev ruby asciidoctor \
libxml2-dev libxslt1-dev zlib1g-dev python3-setuptools
installRNG
}
# generate MISP apache conf
genApacheConf () {
echo "<VirtualHost _default_:80>
ServerAdmin admin@localhost.lu
ServerName misp.local
Redirect permanent / https://misp.local
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
</VirtualHost>
<VirtualHost _default_:443>
ServerAdmin admin@localhost.lu
ServerName misp.local
DocumentRoot $PATH_TO_MISP/app/webroot
<Directory $PATH_TO_MISP/app/webroot>
Options -Indexes
AllowOverride all
Require all granted
Order allow,deny
allow from all
</Directory>
SSLEngine On
SSLCertificateFile /etc/ssl/private/misp.local.crt
SSLCertificateKeyFile /etc/ssl/private/misp.local.key
# SSLCertificateChainFile /etc/ssl/private/misp-chain.crt
LogLevel warn
ErrorLog /var/log/apache2/misp.local_error.log
CustomLog /var/log/apache2/misp.local_access.log combined
ServerSignature Off
Header set X-Content-Type-Options nosniff
Header set X-Frame-Options DENY
</VirtualHost>" | sudo tee /etc/apache2/sites-available/misp-ssl.conf
}
# Add git pull update mechanism to rc.local - TODO: Make this better
gitPullAllRCLOCAL () {
sudo sed -i -e '$i \git_dirs="/usr/local/src/misp-modules /var/www/misp-dashboard /usr/local/src/faup /usr/local/src/mail_to_misp /usr/local/src/misp-modules /usr/local/src/viper /var/www/misp-dashboard"\n' /etc/rc.local
sudo sed -i -e '$i \for d in $git_dirs; do\n' /etc/rc.local
sudo sed -i -e '$i \ echo "Updating ${d}"\n' /etc/rc.local
sudo sed -i -e '$i \ cd $d && sudo git pull &\n' /etc/rc.local
sudo sed -i -e '$i \done\n' /etc/rc.local
}
# Main composer function
composer () {
sudo mkdir -p /var/www/.composer ; sudo chown ${WWW_USER}:${WWW_USER} /var/www/.composer
${SUDO_WWW} sh -c "cd ${PATH_TO_MISP}/app ; php composer.phar install --no-dev"
}
# Legacy composer function
composer74 () {
sudo mkdir -p /var/www/.composer ; sudo chown ${WWW_USER}:${WWW_USER} /var/www/.composer
${SUDO_WWW} sh -c "cd ${PATH_TO_MISP}/app ; php7.4 composer.phar install --no-dev"
}
# TODO: FIX somehow the alias of the function does not work
# Composer on php 7.0 does not need any special treatment the provided phar works well
alias composer70=composer
# Composer on php 7.2 does not need any special treatment the provided phar works well
alias composer72=composer
# Composer on php 7.3 does not need any special treatment the provided phar works well
alias composer73=composer
# TODO: this is probably a useless function
# Enable various core services
enableServices () {
sudo systemctl daemon-reload
sudo systemctl enable --now mysql
sudo systemctl enable --now apache2
sudo systemctl enable --now redis-server
}
# TODO: check if this makes sense
# Generate rc.local
genRCLOCAL () {
if [[ ! -e /etc/rc.local ]]; then
echo '#!/bin/sh -e' | tee -a /etc/rc.local
echo 'exit 0' | sudo tee -a /etc/rc.local
chmod u+x /etc/rc.local
fi
sudo sed -i -e '$i \echo never > /sys/kernel/mm/transparent_hugepage/enabled\n' /etc/rc.local
sudo sed -i -e '$i \echo 1024 > /proc/sys/net/core/somaxconn\n' /etc/rc.local
sudo sed -i -e '$i \sysctl vm.overcommit_memory=1\n' /etc/rc.local
sudo sed -i -e '$i \[ -f /etc/init.d/firstBoot ] && bash /etc/init.d/firstBoot\n' /etc/rc.local
}
# Run PyMISP tests
runTests () {
echo "url = \"${MISP_BASEURL}\"
key = \"${AUTH_KEY}\"" |sudo tee ${PATH_TO_MISP}/PyMISP/tests/keys.py
sudo chown -R $WWW_USER:$WWW_USER $PATH_TO_MISP/PyMISP/
${SUDO_WWW} sh -c "cd $PATH_TO_MISP/PyMISP && git submodule foreach git pull origin main"
${SUDO_WWW} ${PATH_TO_MISP}/venv/bin/pip install -e $PATH_TO_MISP/PyMISP/.[fileobjects,neo,openioc,virustotal,pdfexport]
${SUDO_WWW} sh -c "cd $PATH_TO_MISP/PyMISP && ${PATH_TO_MISP}/venv/bin/python tests/testlive_comprehensive.py"
}
# Nuke the install, meaning remove all MISP data but no packages, this makes testing the installer faster
nuke () {
echo -e "${RED}YOU ARE ABOUT TO DELETE ALL MISP DATA! Sleeping 10, 9, 8...${NC}"
sleep 10
sudo rm -rvf /usr/local/src/{misp-modules,viper,mail_to_misp,LIEF,faup}
sudo rm -rvf /var/www/MISP
sudo mysqladmin -h $DBHOST drop misp
sudo mysql -h $DBHOST -e "DROP USER misp@localhost"
}
# Final function to let the user know what happened
theEnd () {
space
echo "Admin (root) DB Password: $DBPASSWORD_ADMIN" |$SUDO_CMD tee /home/${MISP_USER}/mysql.txt
echo "User (misp) DB Password: $DBPASSWORD_MISP" |$SUDO_CMD tee -a /home/${MISP_USER}/mysql.txt
echo "Authkey: $AUTH_KEY" |$SUDO_CMD tee -a /home/${MISP_USER}/MISP-authkey.txt
# Commenting out, see: https://github.com/MISP/MISP/issues/5368
# clear -x
space
echo -e "${LBLUE}MISP${NC} Installed, access here: ${MISP_BASEURL}"
echo
echo "User: admin@admin.test"
echo "Password: admin"
space
##[[ -n $KALI ]] || [[ -n $DASHBOARD ]] || [[ -n $ALL ]] && echo -e "${LBLUE}MISP${NC} Dashboard, access here: ${MISP_BASEURL}:8001"
##[[ -n $KALI ]] || [[ -n $DASHBOARD ]] || [[ -n $ALL ]] && space
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo -e "viper-web installed, access here: ${MISP_BASEURL}:8888"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo -e "viper-cli configured with your ${LBLUE}MISP${NC} ${RED}Site Admin Auth Key${NC}"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo "User: admin"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && echo "Password: Password1234"
##[[ -n $KALI ]] || [[ -n $VIPER ]] || [[ -n $ALL ]] && space
echo -e "The following files were created and need either ${RED}protection or removal${NC} (${YELLOW}shred${NC} on the CLI)"
echo "/home/${MISP_USER}/mysql.txt"
echo -e "${RED}Contents:${NC}"
cat /home/${MISP_USER}/mysql.txt
echo "/home/${MISP_USER}/MISP-authkey.txt"
echo -e "${RED}Contents:${NC}"
cat /home/${MISP_USER}/MISP-authkey.txt
space
echo -e "The ${RED}LOCAL${NC} system credentials:"
echo "User: ${MISP_USER}"
echo "Password: ${MISP_PASSWORD} # Or the password you used of your custom user"
space
echo "GnuPG Passphrase is: ${GPG_PASSPHRASE}"
space
echo "To enable outgoing mails via postfix set a permissive SMTP server for the domains you want to contact:"
echo
echo "sudo postconf -e 'relayhost = example.com'"
echo "sudo postfix reload"
space
echo -e "Enjoy using ${LBLUE}MISP${NC}. For any issues see here: https://github.com/MISP/MISP/issues"
space
if [[ "$UNATTENDED" == "1" ]]; then
echo -e "${RED}Unattended install!${NC}"
echo -e "This means we guessed the Base URL, it might be wrong, please double check."
space
fi
if [[ "$PACKER" == "1" ]]; then
echo -e "${RED}This was an Automated Packer install!${NC}"
echo -e "This means we forced an unattended install."
space
fi
if [[ "$USER" != "$MISP_USER" && "$UNATTENDED" != "1" ]]; then
sudo su - ${MISP_USER}
fi
}
# <snippet-end 0_support-functions.sh>
# <snippet-begin 0_installDepsPhp72.sh>
# Install Php 7.2 dependencies
installDepsPhp72 () {
debug "Installing PHP 7.2 dependencies"
PHP_ETC_BASE=/etc/php/7.2
PHP_INI=${PHP_ETC_BASE}/apache2/php.ini
checkAptLock
sudo apt install -qy \
libapache2-mod-php \
php php-cli \
php-dev \
php-json php-xml php-mysql php7.2-opcache php-readline php-mbstring php-zip \
php-redis php-gnupg \
php-intl php-bcmath \
php-gd
for key in upload_max_filesize post_max_size max_execution_time max_input_time memory_limit
do
sudo sed -i "s/^\($key\).*/\1 = $(eval echo \${$key})/" $PHP_INI
done
sudo sed -i "s/^\(session.sid_length\).*/\1 = $(eval echo \${session0sid_length})/" $PHP_INI
sudo sed -i "s/^\(session.use_strict_mode\).*/\1 = $(eval echo \${session0use_strict_mode})/" $PHP_INI
}
## End Function Section Nothing allowed in .md after this line ##
# <snippet-end 0_installDepsPhp72.sh>