Skip to content

Export Modules

BPF Export

Export IDS-marked event and object network attributes as a tcpdump/libpcap capture filter. [source code]

  • features:

    Produces a sorted, deduplicated BPF capture expression for IPv4/IPv6 hosts and networks, IP/port pairs, domains, hostname/port pairs, domain/IP pairs, ports and MAC addresses. Only to_ids attributes are included; deleted data is excluded. Names are resolved by libpcap at filter compilation time. Empty matches return an error rather than an unfiltered capture. See the usage guide.

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded libpcap capture filter for tcpdump -F; skipped counts and warnings in the API response.

  • references:

    https://www.tcpdump.org/manpages/pcap-filter.7.html

CEF Export

Module to export a MISP event in CEF format. [source code]

Cisco IOS ACL Export

Export IDS-marked network attributes as Cisco IOS/IOS-XE IPv4 and IPv6 ACL fragments. [source code]

Cisco ASA ACL Export

Export IDS-marked network attributes as Cisco ASA 9.x IPv4/IPv6 extended ACL entries. [source code]

  • features:

    Exports validated IDS-marked event and object network attributes as deduplicated IPv4/IPv6 configuration fragments. Preserves source/destination address and port constraints. Deleted data is excluded. DNS-only attributes require opt-in resolve_dns. No device connection or additional dependency is required. See the usage guide for configuration, logging semantics and policy integration.

  • config:

    • mode
    • name_prefix
    • resolve_dns

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded configuration fragment; rule counts, skipped counts and integration warnings.

  • references:

    https://www.cisco.com/c/en/us/td/docs/security/asa/asa-cli-reference/A-H/asa-command-ref-A-H/aa-ac-commands.html

Cisco fireSIGHT blockrule Export

Module to export malicious network activity attributes to Cisco fireSIGHT manager block rules. [source code]

  • features:

    The module goes through the attributes to find all the network activity ones in order to create block rules for the Cisco fireSIGHT manager.

  • config:

    • fmc_ip_addr
    • fmc_login
    • fmc_pass
    • domain_id
    • acpolicy_id

  • input:

    Network activity attributes (IPs, URLs).

  • output:

    Cisco fireSIGHT manager block rules.

  • requirements:

    Firesight manager console credentials

CSV Export

Export event and object attributes of any type as CSV. [source code]

  • features:

    Exports one row per attribute, including object attributes and non-IDS attributes, from every supplied event. Retains event and object context, tags and composite values. Deleted events, objects and attributes are excluded. UTF-8 CSV cells are quoted as needed and formula-like cells are prefixed with an apostrophe for spreadsheet safety. No additional dependencies are required.

  • input:

    MISP events in standard, bare or legacy export format.

  • output:

    Base64-encoded UTF-8 CSV with a fixed header, including for empty input.

Microsoft Defender for Endpoint KQL Export

Defender for Endpoint KQL hunting query export module [source code]

Elastic ECS Export

Export event and object indicators as ECS threat indicators in Elasticsearch Bulk NDJSON. [source code]

Fortinet FortiOS ACL Export

Export IDS-marked network attributes as FortiOS 7.4+ address objects, services and firewall policies. [source code]

  • features:

    Exports validated IDS-marked event and object network attributes as deduplicated IPv4/IPv6 configuration fragments. Preserves source/destination address and port constraints. Deleted data is excluded. DNS-only attributes require opt-in resolve_dns. No device connection or additional dependency is required. See the usage guide for configuration, logging semantics and policy integration.

  • config:

    • mode
    • name_prefix
    • resolve_dns
    • srcintf
    • dstintf
    • start_policy_id

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded configuration fragment; rule counts, skipped counts and integration warnings.

  • references:

    https://docs.fortinet.com/document/fortigate/7.4.8/cli-reference/333889629/config-firewall-policy

GoAML Export

This module is used to export MISP events containing transaction objects into GoAML format. [source code]

  • features:

    The module works as long as there is at least one transaction object in the Event.

    Then in order to have a valid GoAML document, please follow these guidelines: - For each transaction object, use either a bank-account, person, or legal-entity object to describe the origin of the transaction, and again one of them to describe the target of the transaction. - Create an object reference for both origin and target objects of the transaction. - A bank-account object needs a signatory, which is a person object, put as object reference of the bank-account. - A person can have an address, which is a geolocation object, put as object reference of the person.

    Supported relation types for object references that are recommended for each object are the folowing: - transaction: - 'from', 'from_my_client': Origin of the transaction - at least one of them is required. - 'to', 'to_my_client': Target of the transaction - at least one of them is required. - 'address': Location of the transaction - optional. - bank-account: - 'signatory': Signatory of a bank-account - the reference from bank-account to a signatory is required, but the relation-type is optional at the moment since this reference will always describe a signatory. - 'entity': Entity owning the bank account - optional. - person: - 'address': Address of a person - optional.

  • config:

    rentity_id

  • input:

    MISP objects (transaction, bank-account, person, legal-entity, geolocation), with references, describing financial transactions and their origin and target.

  • output:

    GoAML format file, describing financial transactions, with their origin and target (bank accounts, persons or entities).

  • references:

    http://goaml.unodc.org/

  • require_standard_format:

    True

  • requirements:

    • PyMISP
    • MISP objects

Juniper Junos ACL Export

Export IDS-marked network attributes as Junos inet/inet6 stateless firewall filter set commands. [source code]

  • features:

    Exports validated IDS-marked event and object network attributes as deduplicated IPv4/IPv6 configuration fragments. Preserves source/destination address and port constraints. Deleted data is excluded. DNS-only attributes require opt-in resolve_dns. No device connection or additional dependency is required. See the usage guide for configuration, logging semantics and policy integration.

  • config:

    • mode
    • name_prefix
    • resolve_dns

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded configuration fragment; rule counts, skipped counts and integration warnings.

  • references:

    https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/concept/firewall-filter-overview.html

Lite Export

Lite export of a MISP event. [source code]

  • features:

    This module is simply producing a json MISP event format file, but exporting only Attributes from the Event. Thus, MISP Events exported with this module should have attributes that are not internal references, otherwise the resulting event would be empty.

  • config:

    indent_json_export

  • input:

    MISP Event attributes

  • output:

    Lite MISP Event

EQL Query Export

Export MISP event in Event Query Language [source code]

  • features:

    This module produces EQL queries for all relevant attributes in a MISP event.

  • input:

    MISP Event attributes

  • output:

    Text file containing one or more EQL queries

  • references:

    https://eql.readthedocs.io/en/latest/

MikroTik RouterOS ACL Export

Export IDS-marked network attributes as RouterOS IPv4/IPv6 firewall filter commands. [source code]

  • features:

    Exports validated IDS-marked event and object network attributes as deduplicated IPv4/IPv6 configuration fragments. Preserves source/destination address and port constraints. Deleted data is excluded. DNS-only attributes require opt-in resolve_dns. No device connection or additional dependency is required. See the usage guide for configuration, logging semantics and policy integration.

  • config:

    • mode
    • name_prefix
    • resolve_dns
    • chain

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded configuration fragment; rule counts, skipped counts and integration warnings.

  • references:

    https://help.mikrotik.com/docs/spaces/ROS/pages/48660574/Filter

Netfilter nftables Export

Export IDS-marked event and object network attributes as nftables block or logging rules. [source code]

  • features:

    Exports validated IPv4/IPv6 addresses and networks, IP/port pairs, domain/IP pairs, ports and source MAC addresses as deduplicated nftables chain-body rules. Defaults to dropping matches; mode=log logs without changing the firewall verdict. Only to_ids attributes are included, and deleted data is excluded. DNS-only attributes require opt-in resolve_dns and are resolved to address snapshots at export time. See the usage guide.

  • config:

    • mode
    • resolve_dns

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded nftables chain-body fragment; skipped counts and warnings in the API response.

  • references:

Nexthink NXQL Export

Nexthink NXQL query export module [source code]

OSQuery Export

Export MISP event and object indicators as an osquery query pack. [source code]

  • features:

    Produces a JSON query pack with per-query platform selectors and intervals. Validated against osquery 5.24.0. Defaults to IDS-marked attributes, includes object attributes and excludes deleted data. File scans require an explicit scan_path. Set format=sql for legacy SQL text. See the usage guide.

  • config:

    • format
    • interval
    • scan_path
    • include_non_ids

  • input:

    MISP events and object attributes.

  • output:

    Base64-encoded JSON query pack (default) or SQL text, with counts and provenance.

  • references:

    https://osquery.readthedocs.io/en/stable/deployment/configuration/

OWASP CRS Export

Export IDS-marked proxy and HTTP indicators as custom ModSecurity rules alongside OWASP CRS. [source code]

  • features:

    Exports validated source addresses/networks, source address/port pairs, domains, hostnames, hostname/port pairs, HTTP(S) URLs, request URIs and user agents. Only to_ids attributes are included; deleted data is excluded. Produces deterministic, deduplicated phase 1 deny rules with configurable local rule IDs. No network access or additional dependency is required. See the usage guide.

  • config:

    rule_id_start

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded ModSecurity .conf fragment; skipped counts and integration warnings in the response.

  • references:

Palo Alto PAN-OS ACL Export

Export IDS-marked network attributes as PAN-OS local security policy set commands. [source code]

  • features:

    Exports validated IDS-marked event and object network attributes as deduplicated IPv4/IPv6 configuration fragments. Preserves source/destination address and port constraints. Deleted data is excluded. DNS-only attributes require opt-in resolve_dns. No device connection or additional dependency is required. See the usage guide for configuration, logging semantics and policy integration.

  • config:

    • mode
    • name_prefix
    • resolve_dns
    • from_zone
    • to_zone

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded configuration fragment; rule counts, skipped counts and integration warnings.

  • references:

    https://docs.paloaltonetworks.com/pan-os/11-1/pan-os-cli-quick-start

Event to PDF Export

Simple export of a MISP event to PDF. [source code]

  • features:

    The module takes care of the PDF file building, and work with any MISP Event. Except the requirement of reportlab, used to create the file, there is no special feature concerning the Event. Some parameters can be given through the config dict. 'MISP_base_url_for_dynamic_link' is your MISP URL, to attach an hyperlink to your event on your MISP instance from the PDF. Keep it clear to avoid hyperlinks in the generated pdf. 'MISP_name_for_metadata' is your CERT or MISP instance name. Used as text in the PDF' metadata 'Activate_textual_description' is a boolean (True or void) to activate the textual description/header abstract of an event 'Activate_galaxy_description' is a boolean (True or void) to activate the description of event related galaxies. 'Activate_related_events' is a boolean (True or void) to activate the description of related event. Be aware this might leak information on confidential events linked to the current event ! 'Activate_internationalization_fonts' is a boolean (True or void) to activate Noto fonts instead of default fonts (Helvetica). This allows the support of CJK alphabet. Be sure to have followed the procedure to download Noto fonts (~70Mo) in the right place (/tools/pdf_fonts/Noto_TTF), to allow PyMisp to find and use them during PDF generation. 'Custom_fonts_path' is a text (path or void) to the TTF file of your choice, to create the PDF with it. Be aware the PDF won't support bold/italic/special style anymore with this option

  • config:

    • MISP_base_url_for_dynamic_link
    • MISP_name_for_metadata
    • Activate_textual_description
    • Activate_galaxy_description
    • Activate_related_events
    • Activate_internationalization_fonts
    • Custom_fonts_path

  • input:

    MISP Event

  • output:

    MISP Event in a PDF file.

  • references:

    https://acrobat.adobe.com/us/en/acrobat/about-adobe-pdf.html

  • require_standard_format:

    True

  • requirements:

    • PyMISP
    • reportlab

OpenBSD PF Export

Export IDS-marked event and object network attributes as OpenBSD PF block or logging rules. [source code]

  • features:

    Exports validated IPv4/IPv6 addresses and networks, IP/port pairs, domains, hostnames, domain/IP pairs, hostname/port pairs and ports as deduplicated block drop quick rules by default, or match log (all) rules with mode=log. Logging preserves the existing pass/block policy. Only to_ids attributes are included; deleted data is excluded. DNS names are resolved by PF at ruleset load time. No network access or additional Python dependency is required. See the usage guide.

  • config:

    mode

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded PF ruleset fragment; skipped counts and warnings in the API response.

  • references:

QRadar Reference Set Export

Export deduplicated, typed MISP indicators as QRadar reference-set CSV or JSON values. [source code]

  • features:

    Exports one selected indicator type from supplied event and object attributes, with validation, normalization and deduplication. Produces a headerless single-column CSV for Reference Set Management, or a JSON value array. Defaults to IDS-marked IPv4 addresses; IPv6 uses a separate text set. No QRadar connection is required. See the usage guide.

  • config:

    • indicator_type
    • format
    • include_non_ids

  • input:

    MISP events, including object attributes, in standard, bare or legacy format.

  • output:

    Base64-encoded UTF-8 CSV or JSON; counts and provenance are returned separately from the file.

  • references:

    https://www.ibm.com/docs/en/qradar-on-cloud?topic=overview-importing-iocs-reference-set

Sigma Rule Export

Export stored Sigma rules and optionally generate Windows IOC detections. [source code]

  • features:

    Produces a ZIP of Sigma YAML files and a provenance manifest. The default rules mode preserves stored Sigma attributes, including those in objects. Select indicators or both to generate experimental Windows process_creation, dns_query and network_connection rules from supported IDS-marked indicators. Deleted data is excluded; duplicate rules are combined with all source references. See the usage guide.

  • config:

    • mode
    • include_non_ids

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded ZIP containing rules/*.yml and manifest.json.

  • references:

  • requirements:

    PyYAML

Splunk Lookup Export

Export event and object indicators as a Splunk CSV lookup with CIM field mapping hints. [source code]

Squid Proxy Export

Export IDS-marked event and object attributes as Squid proxy ACLs and deny rules. [source code]

  • features:

    Exports validated addresses/networks, domains, hostnames, HTTP(S) URLs and destination ports as deduplicated Squid ACLs with http_access deny rules. Composite attributes retain their constraints. Only to_ids attributes are included; deleted data is excluded. No network access or additional dependency is required. See the usage guide.

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded Squid .conf fragment; skipped counts and integration warnings in the API response.

  • references:

Test Export

Skeleton export module. [source code]

  • features:

ThreatStream Export

Module to export a structured CSV file for uploading to threatStream. [source code]

ThreadConnect Export

Module to export a structured CSV file for uploading to ThreatConnect. [source code]

  • features:

    The module takes a MISP event in input, to look every attribute. Each attribute matching with some predefined types is then exported in a CSV format recognized by ThreatConnect. Users should then provide, as module configuration, the source of data they export, because it is required by the output format.

  • config:

    Default_Source

  • input:

    MISP Event attributes

  • output:

    ThreatConnect CSV format file

  • references:

    https://www.threatconnect.com

  • requirements:

    csv

VirusTotal Collections Export

Creates a VT Collection from an event iocs. [source code]

  • features:

    This export module which takes advantage of a new endpoint in VT APIv3 to create VT Collections from IOCs contained in a MISP event. With this module users will be able to create a collection just using the Download as... button.

  • config:

    • vt_api_key
    • proxy_host
    • proxy_port
    • proxy_username
    • proxy_password

  • input:

    A domain, hash (md5, sha1, sha256 or sha512), hostname, url or IP address attribute.

  • output:

    A VirusTotal collection in VT.

  • references:

  • requirements:

    An access to the VirusTotal API (apikey).

VirusTotal Graph Export

This module is used to create a VirusTotal Graph from a MISP event. [source code]

Wazuh CDB Export

Export MISP event and object indicators as a typed Wazuh CDB source list. [source code]

  • features:

    Produces a sorted, deduplicated key-only CDB list for one indicator type: IPv4, IPv6, domain, MD5, SHA-1, SHA-256 or SHA-512. Defaults to to_ids IPv4 attributes. Includes object attributes, normalizes values, quotes IPv6 keys and excludes deleted data. No Wazuh connection is needed. Register the list and reload analysisd through the Wazuh API to activate detection. See the usage guide.

  • config:

    • indicator_type
    • include_non_ids

  • input:

    MISP events, including object attributes, in standard, bare or legacy format.

  • output:

    Base64-encoded CDB source text, with counts, warnings and provenance outside the file.

  • references:

    https://documentation.wazuh.com/current/user-manual/ruleset/cdb-list.html

YARA Rule Export

This module is used to export MISP events to YARA. [source code]

  • features:

    The module will dynamically generate YARA rules for attributes that are marked as to IDS. Basic metadata about the event is added to the rule. Attributes that are already YARA rules are also exported, with a rewritten rule name.

  • input:

    Attributes and Objects.

  • output:

    A YARA file that can be used with the YARA scanning tool.

  • references:

    https://virustotal.github.io/yara/

  • requirements:

    yara-python python library

Zeek Intel Export

Export validated MISP event and object indicators as a Zeek Intel Framework feed. [source code]

  • features:

    Produces a tab-separated Intel input file with native indicator types, escaped fields, stable source labels and MISP provenance. Supports addresses/subnets, domains, HTTP(S) URLs, emails, file names/hashes, certificate SHA-1 hashes and SSH MD5 fingerprints. Defaults to IDS-marked attributes and excludes deleted data. No Zeek connection or additional dependency is required. See the usage guide.

  • config:

    • source
    • misp_url
    • include_non_ids

  • input:

    MISP events and object attributes in standard, bare or legacy export format.

  • output:

    Base64-encoded ASCII Zeek Intel TSV, with skipped counts and provenance in the API response.

  • references: